Wet rotary tumbler
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
- Posts: 261
- Joined: Thu Sep 21, 2017 11:36 am
- Home club or Range: ARPC
- Contact:
Wet rotary tumbler
Thinking of buying one of these and wondered what the views/experiences of the forum members are of these machines.
I’m not interested in manufacturing one but people’s views on the ones already available ie Thumbler, Lyman cyclone, Frankford Arsenals one
Cheers
I’m not interested in manufacturing one but people’s views on the ones already available ie Thumbler, Lyman cyclone, Frankford Arsenals one
Cheers
Re: Wet rotary tumbler
Evening,
I've got a thumbler ( from JD reloading) and over the last 3/4 years it's done its job exceedingly well.
Produces shinny brass with minimal effort, at a reasonable price ( in my humble opinion, getting brassed off with TLA's )
Best
The greek
I've got a thumbler ( from JD reloading) and over the last 3/4 years it's done its job exceedingly well.
Produces shinny brass with minimal effort, at a reasonable price ( in my humble opinion, getting brassed off with TLA's )
Best
The greek
Suffolk champion...50 mtr precision flinching champion
Howa 308 GRS stock
Uberti 1873 45 LC
Ruger Precision 6.5
Howa 308 GRS stock
Uberti 1873 45 LC
Ruger Precision 6.5
Re: Wet rotary tumbler
I've been wet tumbling for about five years. The results are excellent, and I find the process only marginally more hassle than vibratory tumbling. My tumbler only handles a hundred cases though, so working through a thousand takes longer overall.Keithkilvo1 wrote:Thinking of buying one of these and wondered what the views/experiences of the forum members are of these machines.
I’m not interested in manufacturing one but people’s views on the ones already available ie Thumbler, Lyman cyclone, Frankford Arsenals one
I have a Thumler, and I do not recommend it. It is designed for a dry process and is not suitable for wet work. The inside of the drum is unfinished, and after the very first time I used mine rust was evident through the seams to the surface of the the exterior paint. I didn't get a satisfactory outcome from the supplier or the manufacturer. If you do get a Thumler, be sure to prep and spray the inside with a suitable paint before you get water anywhere near it.
If I was buying again I would defininately go for a FART. The FART has a much higher capacity and a plastic drum, so no rust problems. I have a large poly hexagonal drum waiting for the day my Thumler disintegrates into flakes, which I'll pair with a treadmill-derived base to solve my capacity and rust problems.
-
- Posts: 785
- Joined: Fri Aug 11, 2017 10:30 am
- Home club or Range: FDPC
- Location: West Country
- Contact:
Re: Wet rotary tumbler
I’ve just switched to wet tumbling. the results are far more pleasing if you like shiny brass.
Also much better at cleaning primer pockets on my .44 and .357 cases.
Just brought a Lyman. Check my link below there’s a little video in there somewhere.
Also much better at cleaning primer pockets on my .44 and .357 cases.
Just brought a Lyman. Check my link below there’s a little video in there somewhere.
All views expressed are my own unless otherwise stated! So please take your time to consider my opinions as biased to what i think is best....
http://www.bulletsandpixels.co.uk www.fdpc.org.uk
http://www.bulletsandpixels.co.uk www.fdpc.org.uk
-
- Posts: 1154
- Joined: Fri Dec 10, 2010 3:08 pm
- Contact:
Re: Wet rotary tumbler
If you want to read an un-biased report http://www.targetshooter.co.uk/?s=TumblerKeithkilvo1 wrote:Thinking of buying one of these and wondered what the views/experiences of the forum members are of these machines.
I’m not interested in manufacturing one but people’s views on the ones already available ie Thumbler, Lyman cyclone, Frankford Arsenals one
Cheers
- dromia
- Site Admin
- Posts: 20004
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Wet rotary tumbler
I have been using a Thumler wet tumbler (with ceramic for my black powder cases, steel pins are a faff on too far for me, still prefer dry tumbling my smokeless cases) for over 20 years with no issues, the water shouldn't get anywhere near the inside of the metal drum as the rubber internal liner makes a physical seal with the metal drum so the water cannot get between them.rox wrote:I've been wet tumbling for about five years. The results are excellent, and I find the process only marginally more hassle than vibratory tumbling. My tumbler only handles a hundred cases though, so working through a thousand takes longer overall.Keithkilvo1 wrote:Thinking of buying one of these and wondered what the views/experiences of the forum members are of these machines.
I’m not interested in manufacturing one but people’s views on the ones already available ie Thumbler, Lyman cyclone, Frankford Arsenals one
I have a Thumler, and I do not recommend it. It is designed for a dry process and is not suitable for wet work. The inside of the drum is unfinished, and after the very first time I used mine rust was evident through the seams to the surface of the the exterior paint. I didn't get a satisfactory outcome from the supplier or the manufacturer. If you do get a Thumler, be sure to prep and spray the inside with a suitable paint before you get water anywhere near it.
If I was buying again I would definitely go for a FART. The FART has a much higher capacity and a plastic drum, so no rust problems. I have a large poly hexagonal drum waiting for the day my Thumler disintegrates into flakes, which I'll pair with a treadmill-derived base to solve my capacity and rust problems.
If it is designed for dry tumbling only then you have bought the wrong model for the application.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: Wet rotary tumbler
I used a Thumbler type for a while and it was fine however unbolting the top to see if your brass was clean was a PITA so I moved to a LEM. The basic LEM is undoubtedly more expensive however you can see what is happening and grab a handful of brass to inspect whilst it is running. It is also easier to empty and flush the cases with clean water if needed.
- bradaz11
- Full-Bore UK Supporter
- Posts: 4743
- Joined: Mon Jun 02, 2014 1:23 am
- Home club or Range: The tunnel at Charmouth, BWSS
- Location: Bristol
- Contact:
Re: Wet rotary tumbler
I use one of the chinese type ones. no regrets. I just wouldn't leave it plugged in when not using it. then got a dehydrater to dry the brass out
When guns are outlawed, only Outlaws will have guns
Re: Wet rotary tumbler
I wish I'd known that at the time. Which model should have been included in a wet tumbling brass cleaning kit?dromia wrote:If it is designed for dry tumbling only then you have bought the wrong model for the application.
I have the Thumler Model B. It is designed for rock tumbling, which is a dry process. It was sold as a wet process brass cleaner by shooting suppliers, bundled with STM media. The manufacturers weren't willing to honour the warranty when the tumbler had been used for a wet process.
The liner does not make a perfect water-tight seal. In the words of the manufacturer, it is a "removable rubber liner for quieter use".dromia wrote:the water shouldn't get anywhere near the inside of the metal drum as the rubber internal liner makes a physical seal with the metal drum so the water cannot get between them
As others have found, the unfinished interior of the drum needs painting to prevent rust. Unless you know that and do it before the first use it is too late.
This is the rust I saw after the very first use:
...and after 6 months; flakes of rust on the base, and the seam is opening over half of its length:
Re: Wet rotary tumbler
And it is still running very nicely thanks Dave. Some may see it as a faff but to be honest its a brilliant way to clean cases well. What I did find was that the sea clean was not quite doing the job, but a squirt of hairy lipped squid sorted that nicely.Ovenpaa wrote:I used a Thumbler type for a while and it was fine however unbolting the top to see if your brass was clean was a PITA so I moved to a LEM. The basic LEM is undoubtedly more expensive however you can see what is happening and grab a handful of brass to inspect whilst it is running. It is also easier to empty and flush the cases with clean water if needed.
Rox, I think someone was pulling a fast one chap because I would expect the rubber liner to be in it for wet or dry. It still makes a bit of a racket with the liner fitted, I just place it on some old foam rubber and a towel and happy days.
To empty I just dump the lot into a plastic bowl and fish the cases out, rinse, strain and flick any water out. Roll them 10 at a time on a towel and air dry.
Who is online
Users browsing this forum: No registered users and 1 guest