With the gradual demise of the gun shops in this country it has become difficult to find anything out of the ordinary. For some years now I have been looking for a neck-sizing die for in 8x57 Mauser should anyone know of one for sale.
Thanks JohnE
Looking for a neck-sizing die for 8x57 Mauser
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Looking for a neck-sizing die for 8x57 Mauser
Obviously it's also known as 7.92 Mauser.
I don't know about any other makes, but Lee do their collet neck sizing die in that calibre. CDSG have them for £39.
Triffid
I don't know about any other makes, but Lee do their collet neck sizing die in that calibre. CDSG have them for £39.
Triffid
-
JohnE
Re: Looking for a neck-sizing die for 8x57 Mauser
Thanks Triffid I might have to investigate these if I'm unable to find the traditional fare.
Re: Looking for a neck-sizing die for 8x57 Mauser
The Lee collet sizing die works very well for jacketed bullets or cast boolits. Most FL dies can be adjusted to neck size only.
-
Tony-c
Re: Looking for a neck-sizing die for 8x57 Mauser
Lyman item number 7452305
2 die set,
size die and seat die, with shell holder
2 die set,
size die and seat die, with shell holder
-
dromia
- Site Admin
- Posts: 20229
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Looking for a neck-sizing die for 8x57 Mauser
That has only a full length size die, although you can neck size pretty well with a full length die.
As has been said the Lee collet is the way to go, remember to fettle it before use or crushed cases will be the result.
As has been said the Lee collet is the way to go, remember to fettle it before use or crushed cases will be the result.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
johnson3392
Re: Looking for a neck-sizing die for 8x57 Mauser
Just to concur, I use a Lee collet die set for my Mauser 8x57 reloading. Works very well for me.
Who is online
Users browsing this forum: No registered users and 3 guests