What bullets are you using to load this calibre, is there anything out there for just cheap plinking, the price of surplus going up, time I think to come up with a cheap load
TIA
7.62x39
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
- bnz41
- Posts: 1990
- Joined: Sat Nov 06, 2010 4:20 pm
- Home club or Range: NRA Bisley
- Location: Essex
- Contact:
Re: 7.62x39
I use these bullets from Kranks ppu-bullets 7-62mm-310-fmj-123gr bullets-pack-100 £23.20 per 100.
Re: 7.62x39
I've used this supplier and for quantity should be cheaper
https://www.grauwolf.net/310-7-4-mm-7-6 ... tueck.html
https://www.grauwolf.net/310-7-4-mm-7-6 ... tueck.html
-
- Full-Bore UK Supporter
- Posts: 801
- Joined: Sat Apr 07, 2012 8:38 pm
- Home club or Range: Weybridge
- Location: Bisley
- Contact:
Re: 7.62x39
These are great, 15EUR per 100 and 16EUR delivery so it works out at £145 for 1000 delivered.
https://en.strobl.cz/bullets-s-b-calibe ... mj-2907-1/
https://en.strobl.cz/bullets-s-b-calibe ... mj-2907-1/
Re: 7.62x39
I shoot cast bullets in my 7.62x39.
- dromia
- Site Admin
- Posts: 20229
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: 7.62x39
I like this one, made for the calibre.
http://noebulletmolds.com/NV/index.php? ... tdkfobh7f6
The mould casts perfectly.
http://noebulletmolds.com/NV/index.php? ... tdkfobh7f6
The mould casts perfectly.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: 7.62x39
Thank you all, these give me a good starting point.
Just an addition, is there any cheaper powders to consider rather than Vit or similar. ???
Just an addition, is there any cheaper powders to consider rather than Vit or similar. ???
Who is online
Users browsing this forum: No registered users and 3 guests