Can anyone recommend a reasonably priced thermometer for use when casting lead bullets rather than having to resort to the products marketed by the reloading manufacturers?
Thanks JohnE.
Lead Casting Thermometer
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Doz
Re: Lead Casting Thermometer
If you have a multimeter that can measure temperature you may be able to plug a thermocouple into it and use that. That's what I do, for a total cost of about twenty quid.
Re: Lead Casting Thermometer
I use an infrared thermometer that I already had. It works well.
-
The Lord Flashheart
-
dromia
- Site Admin
- Posts: 20229
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Lead Casting Thermometer
I built myself a PID controller years ago, the parts were more expensive than a normal thermometer but its benefits far exceed the cost.
For years my temperature indicator was how a piece of match stick behaved on top of the melt, but when long range shooting requirements meant that high quality control was necessary then the PID was the only way to go keeping the alloy at a consistent temperature for me meant I was able to concentrate on my casting.
I also use a thermometer fitted to my moulds to help me keep my moulds at the best temp range too, what all this means is more consistent bullets which means less rejects and your pot time becomes more productive. At the end of the day it is down to what you want from your cast bullets.
An accurate thermometer can help in identifying certain alloys.
For years my temperature indicator was how a piece of match stick behaved on top of the melt, but when long range shooting requirements meant that high quality control was necessary then the PID was the only way to go keeping the alloy at a consistent temperature for me meant I was able to concentrate on my casting.
I also use a thermometer fitted to my moulds to help me keep my moulds at the best temp range too, what all this means is more consistent bullets which means less rejects and your pot time becomes more productive. At the end of the day it is down to what you want from your cast bullets.
An accurate thermometer can help in identifying certain alloys.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
legs748
- Posts: 240
- Joined: Sat Jul 07, 2012 1:08 pm
- Home club or Range: Mattersey R&PC
- Location: North Nottinghamshire
- Contact:
Re: Lead Casting Thermometer
Lyman have arrived into the 21st century with a digital thermometer at £30ish. I have one and it seems fine.
It was working when i left it...........
-
meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: Lead Casting Thermometer
What, Dromia using tekkernoloji ? What is the world coming to ? *Mind boggles*dromia wrote:I built myself a PID controller years ago...
We thought a rufty tufty owd caster like you would just dip a thumb in the pot and give it a lick...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Who is online
Users browsing this forum: No registered users and 7 guests