Have been looking at various threads online about Lyman Tufnut media most of which seem to slate it because of the addition of jewellers rouge.
Most people say it ruins your reloading gear and also can damage your brass.
I would be interested to hear other peoples views on it as I have been using it but now not sure wether to bin it or not?
Lyman tufnut media
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Keithkilvo1
- Posts: 277
- Joined: Thu Sep 21, 2017 11:36 am
- Home club or Range: ARPC
- Contact:
Re: Lyman tufnut media
It works fine for me.
-
Mattnall
- Full-Bore UK Supporter
- Posts: 2940
- Joined: Wed Mar 06, 2013 5:32 pm
- Home club or Range: NRA, Redricks TSC, BS1944RC, HRA
- Location: East Herts
- Contact:
Re: Lyman tufnut media
I stopped using it as it was very messy, the green media was better. Never had any issues with it damaging brass or equipment.
Arming the Country, one gun at a time.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
-
Keithkilvo1
- Posts: 277
- Joined: Thu Sep 21, 2017 11:36 am
- Home club or Range: ARPC
- Contact:
Re: Lyman tufnut media
I personally prefer it over the green, I'm using a progressive reloading setup and find it much easier to cycle when I use the tufnut
Who is online
Users browsing this forum: No registered users and 4 guests