7mm rsaum

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
Berger

7mm rsaum

#1 Post by Berger »

Anybody got any recipes for the 7mm rsaum using N165 and 180gr hybrids. Cheers Berger
Top
Berger

Re: 7mm rsaum

#2 Post by Berger »

Popular cartridge I see .so say a more efficient than the 7mm wsm.
Top
The Gun Pimp
Posts: 1154
Joined: Fri Dec 10, 2010 3:08 pm
Contact:
Contact The Gun Pimp

Re: 7mm rsaum

#3 Post by The Gun Pimp »

Not in my experience.
Top
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:
Contact ovenpaa

Re: 7mm rsaum

#4 Post by ovenpaa »

I shoot one however I run it on N560 so cannot help.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
Top
Swamp Donkey

Re: 7mm rsaum

#5 Post by Swamp Donkey »

All i can help with. Image

Sent from my mobile using "An application"
Top
Berger

Re: 7mm rsaum

#6 Post by Berger »

Cheers swamp donkey
Top
Berger

Re: 7mm rsaum

#7 Post by Berger »

Ovenpaa wrote:I shoot one however I run it on N560 so cannot help.
Hi Bud.
I have got some N560 I may well try if you want to pm me your recipe.is there a certain magnum primer that you think helps the es.i am not familiar the magnum primers at all.some use cci br2s in them.
Top
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:
Contact ovenpaa

Re: 7mm rsaum

#8 Post by ovenpaa »

I only use CCI BR Large rifle primers
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
Top
Berger

Re: 7mm rsaum

#9 Post by Berger »

Ovenpaa wrote:I only use CCI BR Large rifle primers
Why !!!!!
Top
User avatar
ovenpaa
Posts: 24689
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:
Contact ovenpaa

Re: 7mm rsaum

#10 Post by ovenpaa »

Because I had the best results with them during load development, it shot a 37mm group at 600m one morning at Ulfborg in Denmark which from memory was around .25 MOA so I decided to call it a day with the development. I did tale to pointing bullets later on which gave a further slight improvement on vertical dispersion so good enough for me. I do not shoot the rifle these days as I have stopped shooting competitions in the Open class.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: wool and 7 guests