RCBS Primer pocket swaging rod (replacement)

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
Blackstuff
Full-Bore UK Supporter
Posts: 7847
Joined: Sun Nov 07, 2010 1:01 pm
Contact:
Contact Blackstuff

Re: RCBS Primer pocket swaging rod (replacement)

#11 Post by Blackstuff »

Well it took them a few days to reply to my email, but just got confirmation last night that they're sending out a replacement rod FoC! Happy days! :good:
DVC
Top
User avatar
WelshShooter
Full-Bore UK Supporter
Posts: 1812
Joined: Wed Jun 25, 2014 9:45 pm
Contact:
Contact WelshShooter

Re: RCBS Primer pocket swaging rod (replacement)

#12 Post by WelshShooter »

Great news! It's always worth an ask. I believe that's why the RCBS products are a little more expensive than others as they offer some replacement parts as Free of Charge.
Top
Rob1

Re: RCBS Primer pocket swaging rod (replacement)

#13 Post by Rob1 »

I picked up one of the RCBS swager system recently, then found I could get a Dillon,which was the one I actually wanted to help clear out a huge back log of crimped brass.

So went from no swager to 2 swaggers in space of 3 days. Lol.

Bloody things like buses....

Rob
Top
User avatar
Blackstuff
Full-Bore UK Supporter
Posts: 7847
Joined: Sun Nov 07, 2010 1:01 pm
Contact:
Contact Blackstuff

Re: RCBS Primer pocket swaging rod (replacement)

#14 Post by Blackstuff »

FYI RCBS set not one, but two replacement rods a couple of weeks ago :good:

I have since bought the RCBS bench tool swager which I have a different problem with....
DVC
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 6 guests