This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
I'm just cant take it anymore I need a small power tool to attach my primer pocket cleaner to, to make it easier , any one know of a cheap power tool, Dremels are very expensive, has anyone got a better way....
My Lyman power trimmer has a small steel bush that rotates as part of the trimming and it cleans pockets very well.
One of these brushes chucked in a cheap power tool, cordless screw driver or such like would do the business. I seem to recall that RCBS might also do similar primer pocket steel wire brushes.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad