I am getting the liking of the 300 wsm.i really fancy one.a tikka varmint in this calibre.what dies should I go for.i see March have norma brass in stock along with some of the 7mm boomers.
Berger300wsm
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: 300wsm
How much are they quoting you for the Brass? I've bought the standard 2 die set from Lee but have tried them out yet.
S&W M&P 15-22
Stoeger Sec 1
Adler a110 Sec 1
Winchester 94 .357,
Marlin 45-70
Savage 10 FP-SR .223
AI AE .308
.357 Westlake Alpha
Have slots open for.....
.22 LB pistol
.22LR rifle
Stoeger Sec 1
Adler a110 Sec 1
Winchester 94 .357,
Marlin 45-70
Savage 10 FP-SR .223
AI AE .308
.357 Westlake Alpha
Have slots open for.....
.22 LB pistol
.22LR rifle
-
Berger
Re: 300wsm
On there website it was £75 for 50 cases.they also have 284 brass at £115 per hundred.it would be less case prep than using 6.5x284 lapua brass.having a .315 neck I would still have to neck turn.
-
dromia
- Site Admin
- Posts: 20228
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: 300wsm
Post removed, this is not the for sale section.
There is a PM function for such things.
There is a PM function for such things.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
Berger
Re: 300wsm
I didn't realise a tikka 300 wsm was a special order.6 months plus after ordering.i will have to look out for a doner I think.
Re: 300wsm
I got a 2nd hand Browning A-bolt that was sitting on the shelf at the local gun shop looking for a home.
S&W M&P 15-22
Stoeger Sec 1
Adler a110 Sec 1
Winchester 94 .357,
Marlin 45-70
Savage 10 FP-SR .223
AI AE .308
.357 Westlake Alpha
Have slots open for.....
.22 LB pistol
.22LR rifle
Stoeger Sec 1
Adler a110 Sec 1
Winchester 94 .357,
Marlin 45-70
Savage 10 FP-SR .223
AI AE .308
.357 Westlake Alpha
Have slots open for.....
.22 LB pistol
.22LR rifle
-
Berger
Re: 300wsm
I will have a look at some Abolts.not a rifle I've looked at.i usually look at tikkas and remys. My 284 is has a T3 action.my 6.5x47 is a remmy 700 semi custom. berger
berger-
Berger
Re: 300wsm
I've seen a mod 70 winchester in 300 wsm but it has a crap laminate stock on it.ive looked everywhere for a tactical stock to put on it.none about.probaly best to shelf the idea.
-
DW58
Re: 300wsm
The Tikka importer says six months delivery, but mine was considerbly less.
I placed my order for a .300 WSM T3 Super Varmint Stainless on 6th May 2014 with MacLeods of Tain, the rifle arrived on 3rd Sept. 2014 - that's four months give or take a couple of days.
My .300 WSM T3 is very accurate and serves the purpose very well. Recoil is dependent on o/a weight and whether or not you use a brake/suppressor. I used mine in an MDT Tac21 chassis for almost two years and coupled with a TET Spartan III mod and TET Tac Brake it wastamed pretty well. The rifle is now in a KRG X-Ray chassis which means an o/a weight of a kilo or so less and recoil is more noticable but by no means unpleasant.
I placed my order for a .300 WSM T3 Super Varmint Stainless on 6th May 2014 with MacLeods of Tain, the rifle arrived on 3rd Sept. 2014 - that's four months give or take a couple of days.
My .300 WSM T3 is very accurate and serves the purpose very well. Recoil is dependent on o/a weight and whether or not you use a brake/suppressor. I used mine in an MDT Tac21 chassis for almost two years and coupled with a TET Spartan III mod and TET Tac Brake it wastamed pretty well. The rifle is now in a KRG X-Ray chassis which means an o/a weight of a kilo or so less and recoil is more noticable but by no means unpleasant.
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: 300wsm
Can't see the point of all these new calibres reproducing what's already available - it's a con IMHO
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
Who is online
Users browsing this forum: No registered users and 5 guests