Recommend me 6.5mm 140/160 grain round nose bullet please
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
breacher
Re: Recommend me 6.5mm 140/160 grain round nose bullet pleas
RWS make 6.5x54ms - I believe Joe at Gunshop Barnet has some.
Re: Recommend me 6.5mm 140/160 grain round nose bullet pleas
Joe is closed at the moment and his site seems to only be a front end with none of the links working. Hope is all OK there.
-
M99
Re: Recommend me 6.5mm 140/160 grain round nose bullet pleas
No Joe has shut up shop.
Sent from my mobile using "An application"
Sent from my mobile using "An application"
-
breacher
Re: Recommend me 6.5mm 140/160 grain round nose bullet pleas
I heard its only temporary due to an admin problem.MiLisCer wrote:No Joe has shut up shop.
Sent from my mobile using "An application"
-
DW58
Re: Recommend me 6.5mm 140/160 grain round nose bullet pleas
AFAIK the last factory ammo which replcated the original loading was from RWS (maybe still available) and CIL as mentioned before above.
-
SSG69
Re: Recommend me 6.5mm 140/160 grain round nose bullet pleas
The 156 gn Lapua Mega is a good bullet, not quite round nose but with a protected, slightly recessed, soft point
Re: Recommend me 6.5mm 140/160 grain round nose bullet pleas
I was tempted to start with the Lapua Naturalis however with Hornady doing a 160 grain round nose with a lead core as opposed to a monolithic it will be my starting point and only choice! Apparently there was a 160 grain Sierra round nose once upon a time however I cannot find a trace of it now.
Who is online
Users browsing this forum: No registered users and 3 guests