I have some magnum pistol primers - small & large - and I'm led to believe that as long as I'm not loading hot loads they will be OK. Any thoughts?
Redcat
Primers
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Swamp Donkey
Re: Primers
Just do normal load development.
Sent from my mobile using "An application"
Sent from my mobile using "An application"
-
WelshShooter
- Full-Bore UK Supporter
- Posts: 1812
- Joined: Wed Jun 25, 2014 9:45 pm
- Contact:
Re: Primers
Just like Swamp Donkey said, you should be fine with normal load development.
I've used standard and magnum small rifle primers. I worked the load up and there was no issues.
I've used standard and magnum small rifle primers. I worked the load up and there was no issues.
-
Laurie
Re: Primers
...... they will be OK? ............. as in, using them in what?redcat wrote:I have some magnum pistol primers - small & large - and I'm led to believe that as long as I'm not loading hot loads they will be OK. Any thoughts?
Redcat
-
saddler
Re: Primers
Sell them to Alpha1, marked up as "reduced power" primers.
It'll be fine
what could possibly go wrong? 
It'll be fine
what could possibly go wrong? -
redcat
- Full-Bore UK Supporter
- Posts: 1423
- Joined: Fri Jan 16, 2015 11:42 am
- Home club or Range: Teesdale P&R Club.
- Contact:
Re: Primers
They will be used in the "pistol calibre" (sorry, Adam) cartridges - .38spl; .357mag: .32/20; .38/40: .44/40: .45Colt.Laurie wrote:...... they will be OK? ............. as in, using them in what?redcat wrote:I have some magnum pistol primers - small & large - and I'm led to believe that as long as I'm not loading hot loads they will be OK. Any thoughts?
Redcat
Redcat
If you think you are a person of some importance, try ordering someone else's dog around.
-
dromia
- Site Admin
- Posts: 20228
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Primers
I like to use magnum primers in BP loads, I use magnum pistol in the 44-40 and 38-40.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
DavidRees
- Posts: 292
- Joined: Sat Jun 22, 2013 11:43 am
- Home club or Range: JSPC; Tayside; NRA
- Location: Scotland
- Contact:
Re: Primers
I've used up magnum primers up (purchased in the days when mainland UK shooters were allowed to own and use revolvers) in light to medium .38SPL and .44SPL loads, without issue. Very little or no extra energy to the bullet velocity over normal primers that I could tell, even when run over a choronograph to compare.
However, as advised above, do follow normal load development practice by starting 10% below the listed powder charge (from a reputable source), and work up SLOWLY. What might be safe in one firearm might not be in yours...
However, as advised above, do follow normal load development practice by starting 10% below the listed powder charge (from a reputable source), and work up SLOWLY. What might be safe in one firearm might not be in yours...
Who is online
Users browsing this forum: No registered users and 5 guests