For my needs I did consider using an autodisk but could not see an easy way to modify it to manuall operation, on the other hand iv'e now got something that should last me the rest of my life.
David
Good Powder Measure for Pistol/Gallery Loads
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Good Powder Measure for Pistol/Gallery Loads
I applaud your enthusiasm, even though your grip on reality may be somewhat tenuous......
-
dromia
- Site Admin
- Posts: 20227
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Good Powder Measure for Pistol/Gallery Loads
I prefer case activated powder dropping as it give far more consistent (accurate) drops.
Consistent technique is the key to successful use of a powder thrower, case activation smooths out any operator error, you still need to try your best to do every thing the same and feel for issues, but the linkages gives consistency. I have Lee Pro Disk units, one of Lee's better products, RCBS and Hornady measures all case activated
I also like fixed cavity measures for small amounts of powder and use the RCBS Little Dandy and Lyman Accumeasures, the rotor cavities are easily adjusted to any exact load by getting one a little larger than you needs and filling it to size with sealant, there are some people in the states who sell adjustable rotors as well but I have never had the need to purchase one.
Consistent technique is the key to successful use of a powder thrower, case activation smooths out any operator error, you still need to try your best to do every thing the same and feel for issues, but the linkages gives consistency. I have Lee Pro Disk units, one of Lee's better products, RCBS and Hornady measures all case activated
I also like fixed cavity measures for small amounts of powder and use the RCBS Little Dandy and Lyman Accumeasures, the rotor cavities are easily adjusted to any exact load by getting one a little larger than you needs and filling it to size with sealant, there are some people in the states who sell adjustable rotors as well but I have never had the need to purchase one.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Who is online
Users browsing this forum: Google [Bot] and 2 guests