marlin 444

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
Swamp Donkey

Re: marlin 444

#11 Post by Swamp Donkey »

Richard Stork. Aka thedevizesgunsmith.co.uk has some 265gr flextip stuff he got in for me, just before i sold the T4

Sent from my mobile using "An application"
mowdy
Posts: 87
Joined: Tue Dec 07, 2010 6:54 pm
Contact:

Re: marlin 444

#12 Post by mowdy »

Horndy and Remington are the only 2,factory loads I have seen in the UK 265gr hornady and 240 he remi.
For target and plunking you have to reload I just use 44 pistol bullets or dodgyrodg cast boolets in my
T444 & 265 flat point interlocks for hunting.
Factory ammo was around £50 a box of 20 last time I bought some!!!!
Bob
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests