GM lead cast bullets

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
Billett

GM lead cast bullets

#1 Post by Billett »

Probably a silly question,as I haven't purchased any yet could simone tell me if the GM lead cast bullets a soft lead or hard cast?

Thanks
User avatar
snayperskaya
Posts: 7234
Joined: Fri Oct 04, 2013 6:43 pm
Home club or Range: West Bank of the Volga.....
Location: West of The Urals
Contact:

Re: GM lead cast bullets

#2 Post by snayperskaya »

Who's Simone?.
"The only real power comes out of a long rifle." - Joseph Stalin

Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.

More than a vested interest in 7.62x54r!
Billett

Re: GM lead cast bullets

#3 Post by Billett »

Lol sorry *somone* still trying to get used to my new phone
User avatar
snayperskaya
Posts: 7234
Joined: Fri Oct 04, 2013 6:43 pm
Home club or Range: West Bank of the Volga.....
Location: West of The Urals
Contact:

Re: GM lead cast bullets

#4 Post by snayperskaya »

Billett wrote:Lol sorry *somone* still trying to get used to my new phone
Only joshin' with you chief :p

I would say they are hard cast
"The only real power comes out of a long rifle." - Joseph Stalin

Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.

More than a vested interest in 7.62x54r!
Billett

Re: GM lead cast bullets

#5 Post by Billett »

Thanks. I was looking at shellhouse which gives you the option to have alloy or soft but couldn't find anywhere that specified what GM's are.
User avatar
snayperskaya
Posts: 7234
Joined: Fri Oct 04, 2013 6:43 pm
Home club or Range: West Bank of the Volga.....
Location: West of The Urals
Contact:

Re: GM lead cast bullets

#6 Post by snayperskaya »

Billett wrote:Thanks. I was looking at shellhouse which gives you the option to have alloy or soft but couldn't find anywhere that specified what GM's are.
Dromia will be along in a bit, he will be able to tell you for sure :good:
"The only real power comes out of a long rifle." - Joseph Stalin

Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.

More than a vested interest in 7.62x54r!
User avatar
dodgyrog
Posts: 4103
Joined: Wed Jan 05, 2011 11:17 pm
Home club or Range: Three Counties Sporting Club & Gardners Guns
Location: Consett, County Durham
Contact:

Re: GM lead cast bullets

#7 Post by dodgyrog »

GM are noted for being hard cast!
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
Billett

Re: GM lead cast bullets

#8 Post by Billett »

Thanks
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests