Clever Shooting Shed

[DW58]

I recently acquired a GRS Bolthorn chassis for my .308 Tikka T3 - this coupled with a Nightforce 5-25x56mm ATACR makes a fantastically accurate combination, however it didn't quite sit properly in the rear bag until I had a conversation with David at the Shooting Shed. This resulte in some measurements being translated into a CAD-type drawing by my son Jamie (Blackburnbuccaneer) for David to work with

Ten days later the bad-rider arrived and it was fitted to the rifle - I'm delighted with it - well done David. The fit is perfect, I'll try it for the first time on Tuesday evening.





Thank you David - fantastic job!

[ovenpaa]

Good to hear it arrived safely and fits.

[DW58]

Delighted with it David - fits perfectly. Just back from the range, but didn't get the chance to shoot it today as it was a dedicated service rifle shoot. Will test it on Tuesday evening.

[DW58]

Works very well David

[ovenpaa]

Good to hear, I seem to have made loads of rear bag riders for different rifles along the years and I do prefer the aesthetics and function of the larger diameter versions however it is all down to the type of bag and filling.

[DW58]

As you can see from my photos I'm using a Seb bag and the two seem to work very well together.