Reloading Confusion
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
tarantulaman
Re: Reloading Confusion
Just letting you know the latest update. I contacted Redding and they asked me about the markings stamped into the dies to confirm I had the correct ones.
Once I told them about the measurements I had taken, they said they would send me 2 new expander balls for the dies, they did not confirm there was a problem though.
So hopefully my problem is now going to be resolved, I must say the Redding customer service guy was very helpful.
Once I told them about the measurements I had taken, they said they would send me 2 new expander balls for the dies, they did not confirm there was a problem though.
So hopefully my problem is now going to be resolved, I must say the Redding customer service guy was very helpful.
-
Dougan
Re: Reloading Confusion
Thanks for the update T-Man...it'll be interesting to see how the new ones measure; and hopefully find that that was the issue...
I confess I've been slack and not contacted Redding myself yet...I thought it might be a palaver, but from what you've said it sounds cool; so I'll get it sorted
I confess I've been slack and not contacted Redding myself yet...I thought it might be a palaver, but from what you've said it sounds cool; so I'll get it sorted
-
tarantulaman
Re: Reloading Confusion
Well be honest I was a bit lazy and only just got around to it myself.
I emailed them around 10pm, got a response within 20 mins or so. I sent them the info they asked for the next morning and when they got to work around 2pm UK time, they contacted me to say they were shipping the parts. Great response time from them.
I used the 'contact us' section of their website, using this you can supply your address so it is really easy.
I emailed them around 10pm, got a response within 20 mins or so. I sent them the info they asked for the next morning and when they got to work around 2pm UK time, they contacted me to say they were shipping the parts. Great response time from them.
I used the 'contact us' section of their website, using this you can supply your address so it is really easy.
Who is online
Users browsing this forum: WelshShooter and 9 guests