Red Primers

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
simong
Posts: 209
Joined: Tue Apr 05, 2011 3:49 pm
Home club or Range: Saxon
Contact:

Red Primers

#1 Post by simong »

Afternoon Peeps,

Just bought some "PPU" 303 and the primers have a red varnish ( fairly bright and distinct,) around the primers.
The ammo was not in a PPU box but the headstamp says "NNY-81 303 MK8Z "
Any ideas if this is standard PPU ? I don't want to be putting vickers fodder through my dear old 1910 smle !
Any thoughts gratefully received.

ttfn
the greek
Attachments
IMG_0100.JPG
Suffolk champion...50 mtr precision flinching champion


Howa 308 GRS stock
Uberti 1873 45 LC
Ruger Precision 6.5
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Red Primers

#2 Post by dromia »

Looks like the machine gun ammo MK8Z

You lucky person getting that, it used to come loose in cardboard boxes with web handle, I've put thousands of those rounds through my 303s with no ill effect, I seem to recall the only difference is the bullet but as my memory is now a forgetery I stand to be corrected on that.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
simong
Posts: 209
Joined: Tue Apr 05, 2011 3:49 pm
Home club or Range: Saxon
Contact:

Re: Red Primers

#3 Post by simong »

Thanks Dromia,

I thought it might be "non standard" but I did not know about powder/pressure/other stuff...

Regards from a relieved greek
Suffolk champion...50 mtr precision flinching champion


Howa 308 GRS stock
Uberti 1873 45 LC
Ruger Precision 6.5
waterford103
Posts: 1076
Joined: Fri Feb 01, 2013 3:34 pm
Home club or Range: Aberdeen FBGC
Location: North-East Scotland
Contact:

Re: Red Primers

#4 Post by waterford103 »

mk8z was a heavier boat tail bullet intended for Vickers heavy machine gun , the z bit indicated nitro cellulose propellent rather than cordite . the red laquer is to weather proof the primer , the bullet may have a black pitch seal . Very good ammo , bit fierce for elderly smellies I thought.

Oh by the way it's corrosive primed , 1981 dated. Just make sure you clean it when you've shot it , boiling water from the breech end does the job of killing the debris from the primer .

:good:
"This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!"
Adolph Hitler – 1933
saddler

Re: Red Primers

#5 Post by saddler »

8z had a heavier bullet than mk.7

Also had some old Kynoch 303 S.L. in the dim & distant past.
(StreamLine....a.k.a. boat tailed in normalese)
ukrifleman
Full-Bore UK Supporter
Posts: 756
Joined: Thu Jun 07, 2012 7:26 pm
Contact:

Re: Red Primers

#6 Post by ukrifleman »

Mk8z ammo was, as already mentioned produced for the Vickers machine gun.

It was a hotter round than the Mk V11 round, it had a charge of 41.5gn of nitrocellulose (not cordite) and had a m/v of 2550fps compared to the MkV11 at 2440fps.

The main difference was, that it had a slightly heavier 175gn boat tailed bullet, as apposed to the 174gn flat based bullet in the Mk V11 round.

It was found that the boat tailed bullet caused accelerated throat wear in Enfield rifles and its use was actively discouraged for this reason, except in extreme emergency when no other ammunition was available.

ukrifleman.
User avatar
450 Martini
Posts: 319
Joined: Tue May 14, 2013 11:28 pm
Home club or Range: Swadlincote RPC
Contact:

Re: Red Primers

#7 Post by 450 Martini »

I had a couple of these rounds turn up in a box of mixed surplus 303 about 10 years ago (those were the days). They were made by Privi for military contracts, back in the 80's 303 still had a few military users.
saddler

Re: Red Primers

#8 Post by saddler »

I thought they still used .303 in the South African army?
User avatar
snayperskaya
Posts: 7234
Joined: Fri Oct 04, 2013 6:43 pm
Home club or Range: West Bank of the Volga.....
Location: West of The Urals
Contact:

Re: Red Primers

#9 Post by snayperskaya »

saddler wrote:I thought they still used .303 in the South African army?
Don't the Canadian Rangers and Indian Police still use the .303 as well?.There's plenty of them knocking about in Afghanistan also.......
"The only real power comes out of a long rifle." - Joseph Stalin

Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.

More than a vested interest in 7.62x54r!
Robert303

Re: Red Primers

#10 Post by Robert303 »

I remember this stuff on sale in the UK about 20 years ago either as privi Partizan or another similar brand name.
It was known as Yugoslavian 303.
Did no obvious harm to my No4 or SMLE so as long as you are not going to use 1000s of rounds of it and the price is right go for it.
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 5 guests