was thinking about getting a hand primer, and this one caught my eye, especially as it will accept press type case holders. Is it a POS or a good bit of kit?
http://www.lymanproducts.com/lyman/case ... metool.php
Lyman Ezee Prime Priming Tool
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
bradaz11
- Full-Bore UK Supporter
- Posts: 4788
- Joined: Mon Jun 02, 2014 1:23 am
- Home club or Range: The tunnel at Charmouth, BWSS
- Location: Bristol
- Contact:
Lyman Ezee Prime Priming Tool
Has anyone used the Lyman Ezee Prime Priming Tool?
was thinking about getting a hand primer, and this one caught my eye, especially as it will accept press type case holders. Is it a POS or a good bit of kit?
http://www.lymanproducts.com/lyman/case ... metool.php
was thinking about getting a hand primer, and this one caught my eye, especially as it will accept press type case holders. Is it a POS or a good bit of kit?
http://www.lymanproducts.com/lyman/case ... metool.php
When guns are outlawed, only Outlaws will have guns
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Lyman Ezee Prime Priming Tool
No idea but I can certainly recommend the RCBS Universal Hand Priming Tool, no need for shell holders and it has very good "feel" feedback when seating.
There's room for all Gods creatures, next to the mash and gravy :)
-
bradaz11
- Full-Bore UK Supporter
- Posts: 4788
- Joined: Mon Jun 02, 2014 1:23 am
- Home club or Range: The tunnel at Charmouth, BWSS
- Location: Bristol
- Contact:
Re: Lyman Ezee Prime Priming Tool
not sure i like the price on that too much - £60 - £100
When guns are outlawed, only Outlaws will have guns
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Lyman Ezee Prime Priming Tool
Scopes, scales and priming tools, buy once, cry once :)
Admittedly I got mine in the US for $59 which at the time was under £35 :)
Admittedly I got mine in the US for $59 which at the time was under £35 :)
There's room for all Gods creatures, next to the mash and gravy :)
-
bradaz11
- Full-Bore UK Supporter
- Posts: 4788
- Joined: Mon Jun 02, 2014 1:23 am
- Home club or Range: The tunnel at Charmouth, BWSS
- Location: Bristol
- Contact:
Re: Lyman Ezee Prime Priming Tool
yeah, i'd consider one at american prices
When guns are outlawed, only Outlaws will have guns
-
bradaz11
- Full-Bore UK Supporter
- Posts: 4788
- Joined: Mon Jun 02, 2014 1:23 am
- Home club or Range: The tunnel at Charmouth, BWSS
- Location: Bristol
- Contact:
Re: Lyman Ezee Prime Priming Tool
so anyone got the lyman?
When guns are outlawed, only Outlaws will have guns
Re: Lyman Ezee Prime Priming Tool
The Lyman looks fine and probably does a very good job. I started off with Lee, moved to RCBS, then modified and added stops to the RCBS and finally made one for myself however looking back on things the Lee which was under a tenner at the time did an OK job and it still sits on my shelf.
-
AlieN
Re: Lyman Ezee Prime Priming Tool
Jon on here (J D Reloading) did a very good video on some options, including Lee, the RCBS universal (which I bought and find very good) and the Lyman.
https://www.youtube.com/watch?v=rJ3IUGKyn5w
AlieN
https://www.youtube.com/watch?v=rJ3IUGKyn5w
AlieN
-
The Gun Pimp
- Posts: 1154
- Joined: Fri Dec 10, 2010 3:08 pm
- Contact:
Re: Lyman Ezee Prime Priming Tool
I got to try a Hornady one recently - thought it was better than the latest Lee or the RCBS which I already have. See report in Target Shooter www.targetshooter.co.uk
-
bradaz11
- Full-Bore UK Supporter
- Posts: 4788
- Joined: Mon Jun 02, 2014 1:23 am
- Home club or Range: The tunnel at Charmouth, BWSS
- Location: Bristol
- Contact:
Re: Lyman Ezee Prime Priming Tool
Jon in his vid says the hornady will only take certain shell holders. tbh, that video only reinforces that the lyman is a good choice :)
the rcbs looks so over complicated, and has put me off it
the rcbs looks so over complicated, and has put me off it
When guns are outlawed, only Outlaws will have guns
Who is online
Users browsing this forum: No registered users and 7 guests