260 Rem loads
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
260 Rem loads
Let's hear what your using:
TRG-22
26" Bartlein 1:8 twist
Lapua brass
140gr Berger hybrid
CCI 200 primer
COAL touching lands
H4350
42.9 - 2776
43.2 - 2804
43.5 - 2823
43.8 - 2834
44.1 - 2887
TRG-22
26" Bartlein 1:8 twist
Lapua brass
140gr Berger hybrid
CCI 200 primer
COAL touching lands
H4350
42.9 - 2776
43.2 - 2804
43.5 - 2823
43.8 - 2834
44.1 - 2887
Re: 260 Rem loads
For each increase of 0.3 grain of powder your velocity increases by 28,19,11 and lastly by 53 fps. why is this? I was expecting a smoother curve. Did you take all the readings on the same day? Or is this to do with pressure.
One for Laurie I think.
One for Laurie I think.
Re: 260 Rem loads
All most the same
Tikka t3 bartlin barrel 1-8 twist 26"
Lapua cases
Cci br2
140 hybrids
H4350 42.2 2818fps
Difference is coal 2.880 to fit AICS mags
I found the jump made no difference with these Bergers. Groups 1/2 moa or better.
Re the jump in speed, it might be as the case get very full pressure goes up a lot. That's just a guess Laurie will be along soon.
Tikka t3 bartlin barrel 1-8 twist 26"
Lapua cases
Cci br2
140 hybrids
H4350 42.2 2818fps
Difference is coal 2.880 to fit AICS mags
I found the jump made no difference with these Bergers. Groups 1/2 moa or better.
Re the jump in speed, it might be as the case get very full pressure goes up a lot. That's just a guess Laurie will be along soon.
Re: 260 Rem loads
AI-AT .260 Remington
26" barrel
Lapua Brass
Lapua 139gn Scenars
CCI 200 primers
COAL - 2.825" (20 thou off the lands)
HODGDON - VARGET
35.5gn - 2,590 fps
36.0gn - 2,633 fps
36.5gn - 2,661 fps
36.7gn - 2,678 fps
37.0gn - 2,691 fps
37.3gn - 2,717 fps
37.7gn - 2,740 fps
38.0gn - 2,746 fps <<-- GOTO LOAD @ 57,539 psi
26" barrel
Lapua Brass
Lapua 139gn Scenars
CCI 200 primers
COAL - 2.825" (20 thou off the lands)
HODGDON - VARGET
35.5gn - 2,590 fps
36.0gn - 2,633 fps
36.5gn - 2,661 fps
36.7gn - 2,678 fps
37.0gn - 2,691 fps
37.3gn - 2,717 fps
37.7gn - 2,740 fps
38.0gn - 2,746 fps <<-- GOTO LOAD @ 57,539 psi
- mag41uk
- Posts: 1847
- Joined: Sat Oct 13, 2012 3:50 pm
- Home club or Range: Aldershot R & P Club
- Location: Reading
- Contact:
Re: 260 Rem loads
AE3 26inch heavy Border barrel 1 in 8.5 twist.
Mainly set to 10 thou off lands.
139 scenar:
42.5gn Hunter Ave 2680
40.5gn N160 Ave 2585
41gn N160 Ave 2600
42gn N160 Ave 2710
44gn N160 Ave 2900
PPU 139gn:
42.5gn N160 Ave 2630
140gn SMK:
43gn Hunter Ave 2680
40.5gn N160 Ave 2570
42gn N160 Ave 2730
123gn Scenar:
43gn Hunter Ave 2690
40.8gn Big Game Ave 2770
44gn N160 Ave 2840
44.1gn N160 Ave 2860
45gn N160 Ave 2920
130gn Norma Golden Target:
45gn N160 Ave 3000
107 SMK:
44gn Big Game Ave 3160
44gn N160 Ave 3080
Mainly set to 10 thou off lands.
139 scenar:
42.5gn Hunter Ave 2680
40.5gn N160 Ave 2585
41gn N160 Ave 2600
42gn N160 Ave 2710
44gn N160 Ave 2900
PPU 139gn:
42.5gn N160 Ave 2630
140gn SMK:
43gn Hunter Ave 2680
40.5gn N160 Ave 2570
42gn N160 Ave 2730
123gn Scenar:
43gn Hunter Ave 2690
40.8gn Big Game Ave 2770
44gn N160 Ave 2840
44.1gn N160 Ave 2860
45gn N160 Ave 2920
130gn Norma Golden Target:
45gn N160 Ave 3000
107 SMK:
44gn Big Game Ave 3160
44gn N160 Ave 3080
Re: 260 Rem loads
How sensitive do you guys think the 260 is to seating depth and has anyone tried N550 with it ?
Thx
Thx
- pe4king
- Posts: 1402
- Joined: Sat Nov 06, 2010 9:59 pm
- Home club or Range: Lydd Rifle Club.
- Location: Rainham, Kent.
- Contact:
Re: 260 Rem loads
When I had my factory Tikka t3 1:8.5" I think I settled on 139 gr scenar with 37 gr of n140 seated to 2.826" worked a treat, I didn't get chance to chrono it. it's not published anywhere to use n140 but why not, (ask SimG) coincidentally it's a mates accuracy load with his 6.5x47 surgeon who yesterday shot a 49 ex 50 McQueens very windy conditions and at 300 instead of 200
What is a Sapper? This versatile genius condenses the whole system of military engineering and all that is useful and practical. He is a man of all work of the Army and the public ready to do anything or go anywhere, in short, he is a Sapper.
- phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: 260 Rem loads
I now have that rifle and after a bit of load development using Nosler 140gr Custom Competitions I settled on 36gr of Lovex S062, a nice mild shooting load that gives better accuracy than I can physically manage to shoot with.
Couple of sample targets shot at 100m (centres are 1" squares), 5 shot and 10 shot groups shot in a 15-18mph crosswind,


Couple of sample targets shot at 100m (centres are 1" squares), 5 shot and 10 shot groups shot in a 15-18mph crosswind,


There's room for all Gods creatures, next to the mash and gravy :)
Re: 260 Rem loads
N550 works great with 123g scenars or SMKs.....somewhere between 41.5g to 42.3g seems sweet.TJC wrote:How sensitive do you guys think the 260 is to seating depth and has anyone tried N550 with it ?
Thx
- pe4king
- Posts: 1402
- Joined: Sat Nov 06, 2010 9:59 pm
- Home club or Range: Lydd Rifle Club.
- Location: Rainham, Kent.
- Contact:
Re: 260 Rem loads
Jeffphaedra1106 wrote:I now have that rifle and after a bit of load development using Nosler 140gr Custom Competitions I settled on 36gr of Lovex S062, a nice mild shooting load that gives better accuracy than I can physically manage to shoot with.
Couple of sample targets shot at 100m (centres are 1" squares), 5 shot and 10 shot groups shot in a 15-18mph crosswind,
Looking good then !. clapclap
What is a Sapper? This versatile genius condenses the whole system of military engineering and all that is useful and practical. He is a man of all work of the Army and the public ready to do anything or go anywhere, in short, he is a Sapper.
Who is online
Users browsing this forum: Bing [Bot] and 8 guests