Tempilstik
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Tempilstik
Thanks Danny, I am well on the way to finishing the design and build of a new version however it will have to wait until we have moved.
-
Dannywayoflife
Re: Tempilstik
Keep us posted mate. If you go into production I'll have one off Ya.
Re: Tempilstik
So yes lots of fancy annealing machines and stuff but back to my original question.
What temperature range Tempilstik should I buy for annealing my cases. I don't need a annealing machine Iv got one I just need to know what temperature tempilstiks you use. PLEASE.
What temperature range Tempilstik should I buy for annealing my cases. I don't need a annealing machine Iv got one I just need to know what temperature tempilstiks you use. PLEASE.
-
Meaty
Re: Tempilstik
Alpha,
Have a look here http://www.6mmbr.com/annealing.html lots of good info to trawl through.
650' looks like a good place to start.
Personally I prefer to sit in a dark room and watch for a bit of a dull glow on the case.
Have a look here http://www.6mmbr.com/annealing.html lots of good info to trawl through.
650' looks like a good place to start.
Personally I prefer to sit in a dark room and watch for a bit of a dull glow on the case.
Re: Tempilstik
Thanks
Who is online
Users browsing this forum: Bing [Bot], johngarnett, Majestic-12 [Bot] and 6 guests