At the same time as all this I want to fit a more robust forend wood cross bolt and machine in a finger grip on either side hence the bits of mashing tape with various lines drawn on. The final proportions are very similar to that of a short Marlin 1894 and the barrel length will be 420,0mm/16.5" which will still give 2500fps with a 147 grain jacketed bullet and around 2750Joules/2000ft/lbs of muzzle energy assuming the jacket holds together.
Project 2A1 Rascal The saw and pencil come out.
Moderator: dromia
Project 2A1 Rascal The saw and pencil come out.
This afternoon was officially time out for us at long last, so first job was to get the pencil and wood saw out and decide just what length to reduce the 2A1 to, I was not unduly worried by the barrel length as this is not a long range rifle however proportions were a priority so I had been playing with some some basic photo editing software and we had come up with this.
Next job was to translate the image to the rifle itself. The band will need to be moved back some 60,0mm/2-3/8" to allow the nose cap to come back to a reasonable position and this means not only chopping and profiling the wood, I also need to plug the existing hole for the inner band which is not a problem as it will be covered by the nose cap.
At the same time as all this I want to fit a more robust forend wood cross bolt and machine in a finger grip on either side hence the bits of mashing tape with various lines drawn on. The final proportions are very similar to that of a short Marlin 1894 and the barrel length will be 420,0mm/16.5" which will still give 2500fps with a 147 grain jacketed bullet and around 2750Joules/2000ft/lbs of muzzle energy assuming the jacket holds together.
Next job was to translate the image to the rifle itself. The band will need to be moved back some 60,0mm/2-3/8" to allow the nose cap to come back to a reasonable position and this means not only chopping and profiling the wood, I also need to plug the existing hole for the inner band which is not a problem as it will be covered by the nose cap.
At the same time as all this I want to fit a more robust forend wood cross bolt and machine in a finger grip on either side hence the bits of mashing tape with various lines drawn on. The final proportions are very similar to that of a short Marlin 1894 and the barrel length will be 420,0mm/16.5" which will still give 2500fps with a 147 grain jacketed bullet and around 2750Joules/2000ft/lbs of muzzle energy assuming the jacket holds together.
-
Sandgroper
- Full-Bore UK Supporter
- Posts: 4735
- Joined: Sat Nov 06, 2010 3:45 pm
- Location: Stanley, Falkland Islands
- Contact:
Re: Project 2A1 Rascal The saw and pencil come out.
Nice one! 
Looking forward to the end result.
Looking forward to the end result.“The standard you walk past is the standard you accept.”
Lieutenant General David Morrison
I plink, therefore I shoot.
Lieutenant General David Morrison
I plink, therefore I shoot.
Re: Project 2A1 Rascal The saw and pencil come out.
I've always wanted to chop an Enfield to a 14/16" barrel....
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
-
DW58
Re: Project 2A1 Rascal The saw and pencil come out.
Interesting David - looking forward to seeing how this develops. Not sure if I'd want to be next to you on the firing point with that short barrel however 
Re: Project 2A1 Rascal The saw and pencil come out.
Very interesting!
It's certainly a looker
It's certainly a looker
-
snayperskaya
- Posts: 7234
- Joined: Fri Oct 04, 2013 6:43 pm
- Home club or Range: West Bank of the Volga.....
- Location: West of The Urals
- Contact:
Re: Project 2A1 Rascal The saw and pencil come out.
Should look good
Hmmm, wonder what a Mosin M44 carbine with a 12" barrel would be like??!!
Hmmm, wonder what a Mosin M44 carbine with a 12" barrel would be like??!!
"The only real power comes out of a long rifle." - Joseph Stalin
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
-
DW58
Re: Project 2A1 Rascal The saw and pencil come out.
Horrible, and even nastier than the normal length M44 I shot next to a month or two back.snayperskaya wrote:Should look good
Hmmm, wonder what a Mosin M44 carbine with a 12" barrel would be like??!!
-
snayperskaya
- Posts: 7234
- Joined: Fri Oct 04, 2013 6:43 pm
- Home club or Range: West Bank of the Volga.....
- Location: West of The Urals
- Contact:
Re: Project 2A1 Rascal The saw and pencil come out.
Might have to give it a go thenDW58 wrote:Horrible, and even nastier than the normal length M44 I shot next to a month or two back.snayperskaya wrote:Should look good
Hmmm, wonder what a Mosin M44 carbine with a 12" barrel would be like??!!
"The only real power comes out of a long rifle." - Joseph Stalin
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
Re: Project 2A1 Rascal The saw and pencil come out.
What prompted you to decide to build a cut down version of the smle. ? Is this going to be in .303.
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Project 2A1 Rascal The saw and pencil come out.
Looks like he is keeping the original 7.62 NATO calibre.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Who is online
Users browsing this forum: No registered users and 6 guests