This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Iv got a scope rail for the MAS36 I'm looking for a suitable scope then Im going to give it a whirl with cast boolits. I don't suppose any body has any info on cast in the
MAS 36. I got to thinking the majority of ranges I shoot over are 25 yards or maybe 100 yards. Some times 200 0r maybe 300. At the moment I reload for it with N140 using Hornady 155 grain A max bullets etc. It just seems a bit of overkill at the ranges I shoot at. Don't get me wrong it is one accurate rifle it shoots were you point it no problem. But I have all ready dragged all my casting stuff out well nearly all of it so I thought what the Hell lets give it a go. I don't know how much info is out there for the MAS in cast. Anybody Im going to slug the bore to morrow to give me a starting point.
Im going to slug the bore to morrow to give me a starting point.
