NOE moulds

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

NOE moulds

#1 Post by dromia »

Just a to let you know post that NOE have just added around 500 stock moulds to their inventory so if you have been waiting for particular mould to come into stock then it may well be there now.

Have a look here: http://noebulletmolds.com/NV/index.php
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: NOE moulds

#2 Post by Alpha1 »

I checked the mould I'm after still shows as nil stock.
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: NOE moulds

#3 Post by dromia »

lol lol
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: NOE moulds

#4 Post by Alpha1 »

I think I finally sussed how to use the NOE forum and web site wish list thingy. I have signed up the mould is out of stock but it looks like they will make me one. I might buy some of there other stuff expanders etc. To see how its done. One of the Guys is going over to Florida he will be back in the new year so I may as well fill my boots seeing as the postage to the UK will be nil. shakeshout
User avatar
jjvc
Posts: 590
Joined: Sat Nov 06, 2010 6:28 pm
Location: Durham
Contact:

Re: NOE moulds

#5 Post by jjvc »

I have quite a few NOE moulds Dave, the latest I am signed up for is the 6.5 Kurtz mould for my M96 Swede.

Its all quality kit they manufacture, go for it.

Joe ;)
Meaty

Re: NOE moulds

#6 Post by Meaty »

jjvc wrote:I have quite a few NOE moulds Dave, the latest I am signed up for is the 6.5 Kurtz mould for my M96 Swede.

Its all quality kit they manufacture, go for it.

Joe ;)
+1 on that. I only have 2 but am eyeing up number 3 for my K98.
User avatar
mag41uk
Posts: 1847
Joined: Sat Oct 13, 2012 3:50 pm
Home club or Range: Aldershot R & P Club
Location: Reading
Contact:

Re: NOE moulds

#7 Post by mag41uk »

I wonder how practical it would be to get a group buy with NOE to split the delivery cost/duty to the UK?
There may be several of us looking for various moulds.
If Al was an ebay seller we could take advantage of ebays global delivery which is pretty cheap and pays duty up front.
Tony
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: NOE moulds

#8 Post by Alpha1 »

I got a reply to my email he is going to cut the mold for me he said it will probably be in December. That just works out right for the Guy to bring it back from Florida in the new year. lollol
If the mould was right I could be up for group buy.
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: NOE moulds

#9 Post by dromia »

Easy enough, all you need is ten orders for the same mould.

Shipping is a bit more complicated for example it is cheaper to get two moulds sent in the small package than four moulds sent in the medium package. The only real saving would be the £8s parcel farce charge for not delivering your pakage.

I'm happy enough to honcho one at NOE for you if you decide what you want and liase with Al for postage options.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: NOE moulds

#10 Post by dromia »

BTW how does the ebay thing work and how much cheaper is it than the usual USPS?
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests