I only had a couple of cases to charge for the mas36 in 7.5 so I thought I know Ill have a go with my Lee hand press supposedly people use them all the time for full length sizing rifle cases.
Madness I gave up after the first attempt it was bad enough sizing it down to the case rim but trying to get that final bump. No chance. I lubed it by hand before trying with unique sizing wax that is really good stuff. I'm full of admiration for any one that can full length size a 100 rounds on one of these things. Madness sheer madness. I ran them through my lyman crusher like a hot knife through butter much more civilised. clapclap
Full length sizing with Lee hand press.
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Swamp Donkey
Re: Full length sizing with Lee hand press.
Must be doing something wrong then, I do 100x batches of .222, .223, .308 and .338LM with mine. All full length sized.
Pete
Pete
Re: Full length sizing with Lee hand press.
I take my hat of to you Sir. Not my cup of tea. What type of lube do you use. What is your technique when sizing.
-
kennyc
- Posts: 2340
- Joined: Wed Jul 20, 2011 11:21 pm
- Home club or Range: hunters NRPC
- Location: Reading West Berks
- Contact:
Re: Full length sizing with Lee hand press.
7.5x55 imperial sizing wax and sit in front of telly, take my time and squeeze! tongueout
-
Sandgroper
- Full-Bore UK Supporter
- Posts: 4735
- Joined: Sat Nov 06, 2010 3:45 pm
- Location: Stanley, Falkland Islands
- Contact:
Re: Full length sizing with Lee hand press.
I'll take it off your hands if you don't want it any more! 
“The standard you walk past is the standard you accept.”
Lieutenant General David Morrison
I plink, therefore I shoot.
Lieutenant General David Morrison
I plink, therefore I shoot.
Re: Full length sizing with Lee hand press.
Either Lee resizing lube or Lyman Quickshot.....
I'll give you a tenner for it, I could always do with an extra one on the bench.
I'll give you a tenner for it, I could always do with an extra one on the bench.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: Full length sizing with Lee hand press.
Ah, Grant got in there first...
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: Full length sizing with Lee hand press.
Sorry chaps. I normally use it for depriming cases with the Lee depriming die. I certainly won't be trying to resize with it again.
Who is online
Users browsing this forum: No registered users and 6 guests