Which powder for .308 ?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
- dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: Which powder for .308 ?
Water damaged - bought at an auction - 3000 rounds for a fiver!!!!!
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
Re: Which powder for .308 ?
N140, Lapua brass, SMK 155gn, good to 900 and possibly beyond
Re: Which powder for .308 ?
TR140 (cheaper than N140 and every bit as good).TJC wrote:I'm curious to hear what powder you guys are now using for your .308
Nosler CC 155 (cheaper and better than Sierra 2155).
Does the TR thing better than I can ;¬x
..
- phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Which powder for .308 ?
Still using 168Gr Nosler Custom Competition bullets, thought of switching to 155s but as I only shoot at a max of 300yds and I have almost 3,000 168s decided not to bother!.
42gr of N140 works very nicely (1/2 MOA)
43gr of Lovex S062 same results and only £30/Kg
42gr of N140 works very nicely (1/2 MOA)
43gr of Lovex S062 same results and only £30/Kg

There's room for all Gods creatures, next to the mash and gravy :)
Re: Which powder for .308 ?
155gr SMK (2156), Lapua brass, either Vihtavuori N140 or Reload Swiss RS50 (aka TR140).
Re: Which powder for .308 ?
I'm still using up my supply of Varget (only about 4 tubs left though) 

Who is online
Users browsing this forum: No registered users and 7 guests