Shotgun slug supplier
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
zanes
Shotgun slug supplier
As I'm finally getting a FAC pump, I need to think about slug reloading for 12g. I'm sure somewhere I've seen a good looking (european based) supplier of slugs and cases, but I'm blowed if I can remember it. Any suggestions?
Re: Shotgun slug supplier
http://www.buckandslug.co.uk/zanes wrote:As I'm finally getting a FAC pump, I need to think about slug reloading for 12g. I'm sure somewhere I've seen a good looking (european based) supplier of slugs and cases, but I'm blowed if I can remember it. Any suggestions?
Or was it the one based in Italy you were after?
Re: Shotgun slug supplier
Siarm?zanes wrote:Think it was the Italian one, though that's worth knowing.
-
Blackstuff
- Full-Bore UK Supporter
- Posts: 7844
- Joined: Sun Nov 07, 2010 1:01 pm
- Contact:
Re: Shotgun slug supplier
Saddler and Phraraajlclanflna (sorry Jeff) should be along soon who are both knowledgeable on the subject
DVC
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Shotgun slug supplier
Siarm as said above http://www.siarm.com/index.php?cPath=2& ... cd55daafcc
Found them to be very good, delivery by TNT usually within a week, just convert their € prices straight to £ as they have a 20% VAT rate.
For some reason (I assume shipping restrictions) you can't place an order containing primed hulls on the web site, if you want to order them (which can work out cheaper) drop them an email with your list of stuff and they will generate an invoice for you, never seen any increase in the shipping costs though
Working on my last order costs were £39/100 or £10 for a box of 25.
12G Slug Costs
EVO Fiocchi T1 12G 12/70/08 Case 05p
19 Grains GM3 06p
12 Deer Slug 28p
Found them to be very good, delivery by TNT usually within a week, just convert their € prices straight to £ as they have a 20% VAT rate.
For some reason (I assume shipping restrictions) you can't place an order containing primed hulls on the web site, if you want to order them (which can work out cheaper) drop them an email with your list of stuff and they will generate an invoice for you, never seen any increase in the shipping costs though
Working on my last order costs were £39/100 or £10 for a box of 25.
12G Slug Costs
EVO Fiocchi T1 12G 12/70/08 Case 05p
19 Grains GM3 06p
12 Deer Slug 28p
There's room for all Gods creatures, next to the mash and gravy :)
-
saddler
Re: Shotgun slug supplier
I make my own sabot slugs, using the Lyman mold (the slug looks like a large match airgun pellet)
Very easy to do & very cheap too given access to free range lead
Very easy to do & very cheap too given access to free range lead
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Shotgun slug supplier
Basic Lee 12g Load-All II, cheap as chips and does everything I need
There's room for all Gods creatures, next to the mash and gravy :)
Who is online
Users browsing this forum: No registered users and 5 guests