Hi Guys, Just about to start loading for the above cartridge using N140 powder, nny 54r cases and PPU 174 gr FMJBT bullets. Looked in various books and at the Laupa site. The closest I can get is for a 170gr bullet. The general consensus seems to be start at 43.5gr and max of 46.9. Does that sound about right?
Also I have some 7.62 x 53R cases. Would it be alright to use them in my Mosin?
Thanks
Starting Loads for 7.62 x 54R
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Starting Loads for 7.62 x 54R
The Lapua bras is actually 7.62x53R.
Yes 7.62x53R is fine to use in the Mosin.
Yes 7.62x53R is fine to use in the Mosin.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
snayperskaya
- Posts: 7234
- Joined: Fri Oct 04, 2013 6:43 pm
- Home club or Range: West Bank of the Volga.....
- Location: West of The Urals
- Contact:
Re: Starting Loads for 7.62 x 54R
The Russians round up (54r), the Finns round down (53r).dromia wrote:The Lapua bras is actually 7.62x53R.
Yes 7.62x53R is fine to use in the Mosin.
Comparison of Finnish 7.62x53R and Russian 7.62x54R cartridges
Round length: 77.00 mm (54R: 77.16)
Case length: 53.50 mm (54R: 53.72)
Rim diameter: 14.40 mm (54R: 14.48)
Bullet diameter: 7.85 mm (54R: 7.92)
"The only real power comes out of a long rifle." - Joseph Stalin
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
Give a man a gun and he can rob a bank.....give a man a bank and he can rob the world!.
More than a vested interest in 7.62x54r!
-
saddler
Re: Starting Loads for 7.62 x 54R
Asked about the x53 as putting together some Finnish kit
Who is online
Users browsing this forum: No registered users and 8 guests