Beam Scale Test weights
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Beam Scale Test weights
I'm just about to start reloading for a new semi custom rifle that I have treated myself to but I've gone a bit mental on the scope side of things so instead of buying an RCBS 1500 Combi, I am going to use my Redding scales and probably buy a Targetmaster for now. I want to check the accuracy of my scales, so does anybody know where I can get check weights for them?
It's not the pace of life that concerns me, it's the sudden stop at the end!
-
saddler
Re: Beam Scale Test weights
...one has a spare set from an older RCBS Chargemaster 1500 which may be up for grabs
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Re: Beam Scale Test weights
PM me some details please 
It's not the pace of life that concerns me, it's the sudden stop at the end!
Re: Beam Scale Test weights
Here's an excellent deal:
http://www.opticswarehouse.co.uk/prodde ... _check-set
http://www.opticswarehouse.co.uk/prodde ... _check-set
-
bigfathairybiker
Re: Beam Scale Test weights
Try new coins.
They weigh exactly what the mint says they weigh.
A variety to choose from and the 20p weighs exactly 5.0 grams.
Mark
They weigh exactly what the mint says they weigh.
A variety to choose from and the 20p weighs exactly 5.0 grams.
Mark
Re: Beam Scale Test weights
Coins or bullets are ok to use as a rough guide but not really accurate enough if you really want to know what your scale is doing.bigfathairybiker wrote:Try new coins.
They weigh exactly what the mint says they weigh.
A variety to choose from and the 20p weighs exactly 5.0 grams.
Mark
I've just weighed 5 x 20 pence pieces
77.08 grains
76.44
77.62
75.84
77.00
-
Meaty
Re: Beam Scale Test weights
I worked for a company for years that made, amongst other things, drug delivery and dosing units for the medical industry. They had a lab for accurately measuring the small doses (methadone 
) during the commissioning stages and as I was a commissioning engineer I made good use of the scales. I now have a nice set of stainless steel washers etc.varying in size from 4mm-12mm all engraved with their exact weights safely tucked away in zip-lock bags. 
Might be worthwhile trying to find a local company that has a similar set-up or even the science labs of a local high school/college.
) during the commissioning stages and as I was a commissioning engineer I made good use of the scales. I now have a nice set of stainless steel washers etc.varying in size from 4mm-12mm all engraved with their exact weights safely tucked away in zip-lock bags. Might be worthwhile trying to find a local company that has a similar set-up or even the science labs of a local high school/college.
-
pnuk
Re: Beam Scale Test weights
Wow, very surprised at that spread of weight. Wonder if that's true of sovereigns etc? Presumably they are spot on in terms of weight?1066 wrote:Coins or bullets are ok to use as a rough guide but not really accurate enough if you really want to know what your scale is doing.bigfathairybiker wrote:Try new coins.
They weigh exactly what the mint says they weigh.
A variety to choose from and the 20p weighs exactly 5.0 grams.
Mark
I've just weighed 5 x 20 pence pieces
77.08 grains
76.44
77.62
75.84
77.00
-
bigfathairybiker
Re: Beam Scale Test weights
Sounds about right as new coins are specified only to one decimal place in grams which is about 1.5 grains.
Mark
Mark
Who is online
Users browsing this forum: Bing [Bot] and 9 guests