Anyone use the above thoughts welcome.
sign92
Lyman Gen 6 Powder Dispenser
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
EagerNoSkill
Re: Lyman Gen 6 Powder Dispenser
Hi bud
Used Lyman Powder - 1200 DPS
Unless they have dramatically fixed it
erratice and down right dangerous overcharges
- I would not touch it
For cheaper get a vastly superior offering from Alan
TARGETMASTER + Tuned Scale
Save money buy a buy proper entry level Lab scale!
Used Lyman Powder - 1200 DPS
Unless they have dramatically fixed it
erratice and down right dangerous overcharges
- I would not touch it
For cheaper get a vastly superior offering from Alan
TARGETMASTER + Tuned Scale
Save money buy a buy proper entry level Lab scale!
-
bnz41
- Posts: 1990
- Joined: Sat Nov 06, 2010 4:20 pm
- Home club or Range: NRA Bisley
- Location: Essex
- Contact:
Re: Lyman Gen 6 Powder Dispenser
Many thanks Tim
-
orsoncart
Re: Lyman Gen 6 Powder Dispenser
Hi, I also have a Lyman 1200 DPS 3. Had it of about 4 years. Most of my reloading has been with Ball Powders such as H 414, for which it has been accurate. I have just started using IMR 4350 , as I am using heavier bullets, and it was terribly innacurate, dropping up to 2 gns too heavy. I phoned Hannams, where I bought it, and they said it was dropping the Stick Powder too fast for the scale to measure accurately. They sent me a small plastic screw-in restrictor, which goes in the delivery tube, FREE, and now it is perfect with IMR4350. I always check weigh every fourth charge, just to be sure. Hope this helps.
Who is online
Users browsing this forum: No registered users and 9 guests