Powder - compromise or separate

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
Charlotte the flyer
Posts: 1155
Joined: Sat Oct 20, 2012 11:02 am
Home club or Range: Classified
Location: Staffs
Contact:

Powder - compromise or separate

#1 Post by Charlotte the flyer »

I am looked to start full bore reloading, I've heard people talk of 'compromise' powders that can do everything. Is this the way to go or should I have separate powders for each calibre? I'm looking to reload .223Rem (M4 Carbine), .303British (Metford, No4), .308Win (Incl 7.62Nato brass) (Rem700, SLR), 7.62R (Nagant), 7.5 Swiss (K31) and 8mm Mauser (K98). The sort of shooting that I do is mainly ETR and Full-bore Gallery ranges, generally 300-600yds but pushing the 308 to 999yds ;) (yes with factory 308) . I enter comps but mainly on my home range which is only 25M. I'm not obsessive about load development (yet!), I just want to use a recipe from a book and go with it for now. I've heard people say that Varget is a good compromise powder but that seems to be drying up, there's this TR-140 and Vhit but I really don't know what to go for. Advice gratefully received.
The above post probably contains sarcasm or some other form of attempted wit, please don't take it to heart.
Matt

Re: Powder - compromise or separate

#2 Post by Matt »

I'm sure youre gonna get lots of answers to this but for me vit n140 is a good one for 308 and 303. The reloading data is a free download on the vit website if you want to have a look.

Good powder and a reasonable price especially if you buy it in the 3.5 kg pots :good:
Meaty

Re: Powder - compromise or separate

#3 Post by Meaty »

+1 on what Matt said.
I use it as my powder of choice for 223, 308, 8mm Mauser and a lot of people swear by it for 303 and 7.5 Swiss. Its an excellent consistent powder at a good price. TR-140 is supposed to be very similar to Vhit 140 and a bit cheaper atm, Varget can be hard to get hold of and works out pricey when you are stuffing iro 45+ grains in a case (approx 155 rounds per lb)
Good luck with the reloading.
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Powder - compromise or separate

#4 Post by Alpha1 »

Vitavouri N140
User avatar
phaedra1106
Posts: 3429
Joined: Wed Feb 08, 2012 9:37 pm
Location: Just outside Sacriston (the nice bit!)
Contact:

Re: Powder - compromise or separate

#5 Post by phaedra1106 »

As suggested above, Vihtavuori N140, cheap (£55 to £65/Kg) and works very nicely indeed :good:
There's room for all Gods creatures, next to the mash and gravy :)
Maggot

Re: Powder - compromise or separate

#6 Post by Maggot »

Matt wrote:I'm sure youre gonna get lots of answers to this but for me vit n140 is a good one for 308 and 303. The reloading data is a free download on the vit website if you want to have a look.

Good powder and a reasonable price especially if you buy it in the 3.5 kg pots :good:
Ist good powder and quite predictable, fills cases nicely too.
Steve E

Re: Powder - compromise or separate

#7 Post by Steve E »

TR140 all the time. It's the only powder that I use. It's exceptional in both .308win and .303. It's also the most cost effective powder on the market.
Rburro2

Re: Powder - compromise or separate

#8 Post by Rburro2 »

Charlotte I use tr140 for .223,308,303
Works well in all
Chapuis
Posts: 1676
Joined: Tue Dec 28, 2010 11:32 am
Contact:

Re: Powder - compromise or separate

#9 Post by Chapuis »

Vihtavouri N140 or TR140 should do it all for you pretty well.
User avatar
mag41uk
Posts: 1847
Joined: Sat Oct 13, 2012 3:50 pm
Home club or Range: Aldershot R & P Club
Location: Reading
Contact:

Re: Powder - compromise or separate

#10 Post by mag41uk »

In the 7.5 x 55 I prefer N150 but 140 should be OK.
If I was reloading all those I would buy 3.5kg of 140 and 150.
It would keep you going for a few years and be an investment!
I see HPS have upped the 3.5kg Viht price from £185 to £215.
Tony
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests