oomans, we need your assistance and digital dexterity. Could those of you who shoot .45 ACP measure the case rims for us please?
We'd like to know:
1. The case rim diameter in mm
2. The brand of ammunition measured
3. The consistency of the diameter
The cases are nominally 12.19 mm across the rim diameter but we're interested in seeing if any particular brands show a tendency to deviate from that measurement.
.45 ACP case dimensions
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
.45 ACP case dimensions
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
-
dromia
- Site Admin
- Posts: 20225
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: .45 ACP case dimensions
I would love to help but I have no instruments calibrated for the strange alien units you require the measurements in.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: .45 ACP case dimensions
Our preference would be for Imperial measurements but we were making the assumption that most of the skinflints out there would be equipped with cheap Chinese digital verniers rather than good old Moore and Wright Imperial micrometers...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
-
dromia
- Site Admin
- Posts: 20225
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: .45 ACP case dimensions
It so then you cannot be serious about the measurements you may be offered.
We get what we expect.
Low expectation = low value returns.
We get what we expect.
Low expectation = low value returns.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: .45 ACP case dimensions
Ah, but having listened to oomans prattle on for a while we're quite adept at winnowing the wheat from the chaff. Consider this an exercise in clown sourcing...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
-
dromia
- Site Admin
- Posts: 20225
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: .45 ACP case dimensions
Poor measurements are poor measurements and you could just be landed with a load of metric chaff with no wheat.
Still it will no doubt pass the time for you, something we all have to do 'till we are dead.
Still it will no doubt pass the time for you, something we all have to do 'till we are dead.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: .45 ACP case dimensions
*ushers dromia to a fireside seat, paws him a pint*
Right oomans, now back to the task...
Right oomans, now back to the task...
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Re: .45 ACP case dimensions
Do you not own a half decent reloading manual which lists SAAMI spec? Any decent manufactured brass will conform to this. They sign up to it.
And worked brass can differ from one case to the next. Stick to SAAMI and you may save yourself considerable headaches trying to "standardise" from batches of fired or unfired brass from different makers.
And worked brass can differ from one case to the next. Stick to SAAMI and you may save yourself considerable headaches trying to "standardise" from batches of fired or unfired brass from different makers.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: .45 ACP case dimensions
The interest is in physical dimensions of the case rim, not what is specified in the manual or reamers lists. Not all cases are equal and it would be good to find a .45 case with a slightly smaller rim diameter out of the factory, look on it as bottom end of the dimensional tolerances.
Anyone?
Anyone?
-
meles meles
- Posts: 6335
- Joined: Mon Jun 06, 2011 8:17 pm
- Home club or Range: HBSA
- Location: Underground
- Contact:
Re: .45 ACP case dimensions
yes ooman: they sign up to SAAMI. But do they achieve it, or is one brand a few thou larger than nominal? Another brand a few thou smaller? And if so, which brand?
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
CEO (Chief Excavatin' Officer)
Badger Korporashun
Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Who is online
Users browsing this forum: Google [Bot] and 7 guests