At the risk of opening a can of worms what would be involved?
This would be producing 357 target loads for club members in club marlins.
I assume some form of third party insurance and the loads proof tested.
Is it that simple?
Tony
Commercially loading ammo
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Steve E
Re: Commercially loading ammo
You most definately need liability insurance, also you can only sell to full members of your club. I would recommend that ammunition is sent to the Birmingham Proof house for testing,(London proof house does not test ammunition). Proof house testing is only valid for that particular batch/run of ammunition and for the components that make up that batch of ammunition.
What you are intending doing is not the commercial loading of ammunition in the true sense, but a service to your club members. At least one of the major Bisley based clubs has been doing this for the past year for its members. It is producing match quality .308 ammunition that out performs RWS .308 at a fraction of the price. Arranging insurance can be problematical and the NRA insurance does not cover loading ammunition for third parties.
What you are intending doing is not the commercial loading of ammunition in the true sense, but a service to your club members. At least one of the major Bisley based clubs has been doing this for the past year for its members. It is producing match quality .308 ammunition that out performs RWS .308 at a fraction of the price. Arranging insurance can be problematical and the NRA insurance does not cover loading ammunition for third parties.
-
dromia
- Site Admin
- Posts: 20225
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Commercially loading ammo
Concur.
If you are selling handloaded ammunition you really do need to check out the HSE regs, I seem to recall that the rounds need to be pressure tested as does their means of packing for transportation none of which is cheap. As well as any liability insurance, which could also be expensive.
If you are selling handloaded ammunition you really do need to check out the HSE regs, I seem to recall that the rounds need to be pressure tested as does their means of packing for transportation none of which is cheap. As well as any liability insurance, which could also be expensive.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Who is online
Users browsing this forum: No registered users and 5 guests