Why are you deleting my posts with out explanation?

[Bradders]

I have noticed that I have had two posts removed, one in the SGC/Lantac thread and one in the .300 Whisper thread!

I believe I have to post at least 30 times before I can use the PM system, so can not reply to moderators/admin/sitestaff etc that way.
This leave me no other option than to post here.

Feel free to email me if you don't want to reply in an open forum, yet I can see no reason as to why you wouldn't

Thanks

Bradders

[dromia]

Firstly if you would read your PM's you would know why your posts have been moved from the forums, not deleted.

Secondly if you would take a little bit of time to read the forums and the conditions therein then you would be less likely to be in breach of the forum conventions with your arrogant and cavalier approach to Full-Bore UK!

Thirdly if you find this unacceptable then I suggest that you find another forum where your attitude would be more at home.

Fourthly in your brief sojourn here you have given the staff more work than the whole of the board has since its inception.

Look to yourself first before chastising others.

Happy New Year

[Christel]

Bradders,

You posted this in the public forum!?
Will you just give me a chance to reply to your emails...two so far!

[Bradders]

Well lets see,
There is a thread titled Lantac and SGC.
In this thread my name was mentioned and it was stated that I am no longer making rifles.
I posted that I am and am in fact currently having parts made so as when I return from Australia, I will start building again, just to bring those interested up to speed.

You have stated in your PM that this is therefore commercial (which it isn't as I'm not touting for work) and that I should post in the Innovations forum.

Why? How can I possibly answer a query if I have to post it ina different forum?

Besides, my post was directly after AR15's.
AR15 is Lanner Tactical (Lantac to most people)
I've had a look in your innovators forum and see no mention of Lanner Tactical or Lantac, yet he is allowed to state what his company is doing while I am not.


Same thing in the .300 Whisper thread, my post gets removed, yet the other one from Paul remains.
Is there a reason for this?

I have no beef with Paul, we talk regularly, but I see a rather unbalanced approach from yourself.
Why the preferential treatment? He even has his company website in his sig line!

I have not seen this kind of heavy handedness on other forums in quite some time (Not since the days of Baz on the BBS, you're not him, are you?) and can not see why you have chosen to single me out.

We have our own CSR shooter forum.
Free speech is allowed there. It's a democracy.

Bradders

[Bradders]

Bradders,

You posted this in the public forum!?
Will you just give me a chance to reply to your emails...two so far!

Christel,
I'm trying to get a response.

In this day and age of iPads and iphoneS we all get emails instantly.
My emails are going unanswered and I don't know whether I'm replying to you or Dromia.

I fully expect this to be removed, but I'd like some answers please

Thanks

Mark

[Christel]

I am not going to respond to your emails since you have decided to post here in the public forum. For your information I do not live in front of my PC, I do have other things to do in life.

This approach does you no favours and Dromia is correct in saying that you (singlehandedly) have caused more work for us mods than anyone else on here for a long time.

[Bradders]

I am not going to respond to your emails since you have decided to post here in the public forum. For your information I do not live in front of my PC, I do have other things to do in life.

This approach does you no favours and Dromia is correct in saying that you (singlehandedly) have caused more work for us mods than anyone else on here for a long time.

So why is Lantac allowed to promote his wares while not being a vendor?
How many others are getting away with it?

In a free society answers to genuine questions are expected, or is this forum some form of one party Police State?

If my few posts have caused you so much work, then this place needs some livening up.

You should see our place :shakeshout:

Bradders

[ovenpaa]

Bradders, why not just go for a place in the Vendors and Innovators? It is free and gives you a chance to show case your products.

[Bradders]

Bradders, why not just go for a place in the Vendors and Innovators? It is free and gives you a chance to show case your products.

I'm not interested in that Ovenpaa,

All I was doing was stating that I'm not dead and buried and am still alive and kicking.

My couple of posts was the end of it.....well it was until they were removed and I received a snotty couple of PM's from Pol Pot.

Am I not allowed to say that I am still around while others can state that "Mark Bradley isn't making guns anymore"?
Funny way to run a forum if you ask me.

I have enough work and a somewhat decent reputation that I don't go touting for work or blowing my own trumpet over shallow victories.
I don't even tout on our own forum, but do permit people to make announcements if they have to.

Again, why one rule for some and another for others?

From the Lantac thread

Dr. Strangelove wrote:
I've tried phoning LanTac and also sent them an online submission, nothing! It sounds as if it's an isolated incident but I was very unimpressed. It isn't hard to answer an online submission form!


Sorry if I missed you, please supply a phone number with any online submissions so I can phone you back. Its been hectic here and we have a pile of emails to go through.
New CNC Lathe is due for install mid Jan and its taking a lot getting ready for it.

_________________
www.lan-tac.com


From the .300 Whisper thread

I have been doing an lot of work with Blackout over the last few months. Mainly suppressed subsonic loads, 995FPS with 220Grainers in full and semi auto as well as straight pull. The semi's & full have been short 9'' barrels with pistol gas systems and its a battle between getting the right chamber pressure to cycle the action with fast burning powders as opposed to the slow dirty stuff. No such problems with straight pulls of course. We have developed a more refined chamber reamer and its delivering very promising accuracy with these slow heavy bullets.

_________________
www.lan-tac.com

A little balance would be nice here, don't you think?

Mark

[EagerNoSkill]

Bradders
I "bothered" you go through your posts / responses
and I see that you are getting responses

As for Dromnia reply to you

Firstly if you would read your PM's you would know why your posts have been moved from the forums, not deleted.
Very clear statement

Secondly if you would take a little bit of time to read the forums and the conditions therein then you would be less likely to be in breach of the forum conventions with your arrogant and cavalier approach to Full-Bore UK!
Dromnia is being very kind calling you arrogant

Thirdly if you find this unacceptable then I suggest that you find another forum where your attitude would be more at home.
I concur Dromnia

Fourthly in your brief sojourn here you have given the staff more work than the whole of the board has since its inception.
Interesting comment - real "Drama Queen" behaviour - you never wrong it appears always everyone else

Look to yourself first before chastising others.
very True - you point 1 finger and 3 point straight back

No doubt you will jump up and down saying how can I make such comments etc etc
- well that little fact has not stopped you from calling members "Frauds", misidentifying people, incorrectly dragging up the past on other forums, making accusations left right and center

This is a particular well run - free and balanced forum - all that is asked that you follow the rules and guidelines. Compared to several others this one is in my opinion the fairest and most enjoyable.

So tell you what why don't you pack your bag of "tude", get stuffed and leave :55: