Page 1 of 1

.303 British Prvi Brass

Posted: Sat Aug 25, 2012 3:17 am
by Blu
I just found a pretty good deal on .303 (British) Prvi brass. Has anyone used this brass? If so what are your thoughts on it? Is the stuff any good?

Thanks in advance for any and all replies.

Blu :twisted:

Re: .303 British Prvi Brass

Posted: Sat Aug 25, 2012 7:07 am
by 20series
Blu

You'll be ok with that, I find it resizes easily just keep an eye on the length it might want trimming back

Alan

Re: .303 British Prvi Brass

Posted: Sat Aug 25, 2012 7:38 am
by Blu
Alan, cheers for the info mate, At $30 for a hundred and looking around that's a good price. I just bought their last 400. I also did some checking around on other gun forums and read some good stuff about .303 Prvi. The stuff I bought is annealed and from what I've read a little thicker than other commercial brass, I suspect this stuff is military surplus and it is boxer.

Blu :twisted:

Re: .303 British Prvi Brass

Posted: Sat Aug 25, 2012 8:00 am
by AL8
I use 7.5x55 Prvi brass and am very happy with it

Re: .303 British Prvi Brass

Posted: Sat Aug 25, 2012 8:29 am
by Steve
I find Privi rifle brass good quality and provided you neck size only-you should be able to reload it many many times.

Re: .303 British Prvi Brass

Posted: Sat Aug 25, 2012 5:31 pm
by Blu
Thank you for taking the time to reply guys, I appreciate it.

Blu :twisted:

Re: .303 British Prvi Brass

Posted: Sun Aug 26, 2012 7:41 am
by dromia
Prvi brass is fine I use a lot of it. I find it cheaper to buy the loaded rounds when comparing tham against virgin brass and have the pleasure of shooting them of ending up with good fireformed cases.

Re: .303 British Prvi Brass

Posted: Sun Aug 26, 2012 8:47 am
by Blu
Dromia, I understand what you mean, as I said though it was a good price and I get to reload them and still have the fun of fire forming them. Not a bad deal all in all.

Blu :twisted: