Page 1 of 2
inside neck reaming
Posted: Sun Mar 25, 2012 12:13 pm
by spud
What do you guys think the best system for inside neck reaming is?
wilson or K&m
Re: inside neck reaming
Posted: Sun Mar 25, 2012 12:26 pm
by meles meles
Only the most trustworthy of barbers...
Re: inside neck reaming
Posted: Sun Mar 25, 2012 12:31 pm
by ovenpaa
I am not convinced by either of them as the slightest deviation will lead to chatter, if I had to choose from either I would say the Wilson.
Re: inside neck reaming
Posted: Sun Mar 25, 2012 12:34 pm
by meles meles
ovenpaa wrote:I am not convinced by either of them as the slightest deviation will lead to chatter,
Chatter: 'tis in the genes of most barbers....
Re: inside neck reaming
Posted: Sun Mar 25, 2012 12:38 pm
by ovenpaa
Mine used be a woman and she seldom spoke, she did however jump when she inadvertently brushed herself against the arm rest and I wiggled my fingers.
Re: inside neck reaming
Posted: Sun Mar 25, 2012 3:28 pm
by dromia
I use the Lee when I can get one of the correct calibre, it works a treat.
I have used the Forster on some 6mm Musgrave cases I was making and that worked well but take your time and go slow.
Re: inside neck reaming
Posted: Sun Mar 25, 2012 3:34 pm
by spud
thanks guys reamed 100 cases to day and re fireformed
all is good now less than 1 thou run out and no do nuts
Re: inside neck reaming
Posted: Sun Mar 25, 2012 3:35 pm
by ovenpaa
K&M or Wilson?
Re: inside neck reaming
Posted: Sun Mar 25, 2012 3:54 pm
by spud
wilson
Re: inside neck reaming
Posted: Sun Mar 25, 2012 3:58 pm
by dromia
Have you tried the Lee?