ummm
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
ummm
Took my first batch of rounds out today to see how they would go.
34.4
34.7
35.0
35.3
35.6
See the attached picture for groups.
34.7 Bottom right seems to be the best of them closely followed by 35.6 on the left hand piece of paper.
What should my next actions be?
Yet to speak to my reloading mentor so just seeing what the wider world would suggest.
rifle remmy 700 .22-250 -
Nosler Brass - Nosler BT's 55gr - Varget - CCI BR primers
34.4
34.7
35.0
35.3
35.6
See the attached picture for groups.
34.7 Bottom right seems to be the best of them closely followed by 35.6 on the left hand piece of paper.
What should my next actions be?
Yet to speak to my reloading mentor so just seeing what the wider world would suggest.
rifle remmy 700 .22-250 -
Nosler Brass - Nosler BT's 55gr - Varget - CCI BR primers
Re: ummm
No image attached.
Re: ummm
Need more information.
What distance were you shooting at.
Was the rifle benched off a bipod or free hand.
Were was your point of aim. Was it the same for each target.
Its a long road my freind and you have only taken your first step.
What distance were you shooting at.
Was the rifle benched off a bipod or free hand.
Were was your point of aim. Was it the same for each target.
Its a long road my freind and you have only taken your first step.

Who is online
Users browsing this forum: No registered users and 3 guests