CZ 452 SINGLE SHOT ADAPTER
Posted: Tue Dec 20, 2011 4:05 pm
Heres some pics of a single shot adapter I made a couple of years ago for CZ 452 , The reason I needed it was for a competition in which you are deducted a percentage of your score if you use a magazine . It is made from a piece of plastic cut from a kitchen chopping board .
Its just clipped into the lips of the mag before being fully inserted .
Fully inserted . when making its a case of trial and error with getting the angle right so it sits in the mag correctly and filing a groove for the round to sit in .
A view from the front , if you drill a small hole at the front above the top of the mag you can insert a pointed object to extract it from the mag
A dummy round sitting in the groove .
Aview of the breech with dummy round presented at the correct height and angle to slide into the chamber
Hope this shows how easy these are to make .
Dave
Its just clipped into the lips of the mag before being fully inserted .
Fully inserted . when making its a case of trial and error with getting the angle right so it sits in the mag correctly and filing a groove for the round to sit in .
A view from the front , if you drill a small hole at the front above the top of the mag you can insert a pointed object to extract it from the mag
A dummy round sitting in the groove .
Aview of the breech with dummy round presented at the correct height and angle to slide into the chamber
Hope this shows how easy these are to make .
Dave