RAMSHOT TAC

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
nicklm

RAMSHOT TAC

#1 Post by nicklm »

Hi, do any of you good people out there know who has any in the uk.

many tx

nick
richard

Re: RAMSHOT TAC

#2 Post by richard »

I used to use Ramshot Terminator really good powder in my .223 then supply dried up never found the reason nobody seemed to know.It was for the US market but made in Belgium.
saddler

Re: RAMSHOT TAC

#3 Post by saddler »

Spoke to an RFD in Yorkshire may still have some a while back, but I cannot recall his name

I THINK he trades as WESTLANDER??

Keen to try some TAC for my 223 & 6.8
User avatar
dodgyrog
Posts: 4103
Joined: Wed Jan 05, 2011 11:17 pm
Home club or Range: Three Counties Sporting Club & Gardners Guns
Location: Consett, County Durham
Contact:

Re: RAMSHOT TAC

#4 Post by dodgyrog »

saddler wrote:Spoke to an RFD in Yorkshire may still have some a while back, but I cannot recall his name

I THINK he trades as WESTLANDER??

Keen to try some TAC for my 223 & 6.8
Mike Pearson at Westlander imports Accurate powders. I have not seen him with any other powders.
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
Chapuis
Posts: 1676
Joined: Tue Dec 28, 2010 11:32 am
Contact:

Re: RAMSHOT TAC

#5 Post by Chapuis »

I may be wrong but I don't think that Ramshot is still imported into the U.K.
Both Ramshot and Accurate Arms powders were or are products of Western Powders in the U.S. There used to be two branches of Accurate Arms, one the U.S. arm, the other based in the Czech republic. They seem to have gone their seperate ways, there has certainly been some parting of the ways.

Westlander import Accurate Arms powders from the Czech republic.
Scotsgun

Re: RAMSHOT TAC

#6 Post by Scotsgun »

Ramshot pretty much dried up a few years ago. It was imported by a business that went belly-up. Trying to remember the name......M??? Range or something. The name will rise from my adled brain eventually.

Anyway, the stalking community bought the stocks by the barrow loads. We were getting it for £10-15 a bottle, depending upon type. It was great stuff; spherical powder, flowed like water from the dispenser when reloading. I've still got 1/2 dozen bottles of Magnum which is my fav.

So unless there is a new importer.......................... I'll pass the word around the stalkers and see if i can drum some up.
saddler

Re: RAMSHOT TAC

#7 Post by saddler »

Chapuis wrote:I may be wrong but I don't think that Ramshot is still imported into the U.K.
Both Ramshot and Accurate Arms powders were or are products of Western Powders in the U.S. There used to be two branches of Accurate Arms, one the U.S. arm, the other based in the Czech republic. They seem to have gone their seperate ways, there has certainly been some parting of the ways.

Westlander import Accurate Arms powders from the Czech republic.
...yeah, one of the powders IS what was made & sold as TAC, but now under a new name as the Czech firm are retailing powder directly

May be worth an e-mail to find out more...
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests