OK I'm about to start reloading my (new) .223 after a gun change.
I've previously used BLC (2) but have a few cans of various Vitavouri powder that I would like to try (to use them up!)
Anyone used Vit powder behind a 53 or 55 grn bullet in .223??
Thanks D
.223 Powder selection
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
20series
- Posts: 4853
- Joined: Mon Nov 08, 2010 10:42 am
- Home club or Range: Oundle R&PC
- Location: Chelveston, Northants
- Contact:
Re: .223 Powder selection
VIT130 or 133 tends to work well with the lighter bullets in 223
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools!!
Douglas Adams, 1952-2001 RIP
Douglas Adams, 1952-2001 RIP
-
dromia
- Site Admin
- Posts: 19993
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: .223 Powder selection
As always the starting point should be the powder manufacturers pressure tested data.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
20series
- Posts: 4853
- Joined: Mon Nov 08, 2010 10:42 am
- Home club or Range: Oundle R&PC
- Location: Chelveston, Northants
- Contact:
Re: .223 Powder selection
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools!!
Douglas Adams, 1952-2001 RIP
Douglas Adams, 1952-2001 RIP
Re: .223 Powder selection
Vt133 is excellent with the lighter bullets. I use it for 50 grain and 55 grain bullets
If using heavy bullets vt140 is very good.
Cheers
Shoppe
If using heavy bullets vt140 is very good.
Cheers
Shoppe
Re: .223 Powder selection
There has always been loads for n140 in the manual.
The 133 was especially developed for the .223 according to the manual.
I have never used 140 with the lighter bullets as the 133 just works perfectly in the lighter stuff.
To me the lighter stuff needs the quicker powder
The 133 was especially developed for the .223 according to the manual.
I have never used 140 with the lighter bullets as the 133 just works perfectly in the lighter stuff.
To me the lighter stuff needs the quicker powder
Re: .223 Powder selection
Thank you all... now I'll have to sort through my powders and see if I have those...
Wonderful what you can find in a workshop!!!
Nearly a full tub of N133 and this- printed Vitavouri Data for a 1 in 12 twist barrel which I have in my Howa.. Same as the link from your post thank you 20 series.
-which I cannot enclose a photo of..
just waiting for my new case activated powder measure from Reloading UK then I can start again!
Wonderful what you can find in a workshop!!!
Nearly a full tub of N133 and this- printed Vitavouri Data for a 1 in 12 twist barrel which I have in my Howa.. Same as the link from your post thank you 20 series.
-which I cannot enclose a photo of..
just waiting for my new case activated powder measure from Reloading UK then I can start again!
Who is online
Users browsing this forum: No registered users and 1 guest