Tumbling media

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
Dave 101

Tumbling media

#1 Post by Dave 101 »

Has any one tried altenatives to tumbling media you buy via your dealer ?
I have seen an idea on youtube that uses Ground walnut shells or corn cob which are supplied to the pet trade for reptile bedding in vivariums . The guy says the shine isnt as good as what we are used to but its perfectly adequate .
I have done a quick search and found walnut shell in a 2.5 Kg pack for £5.99 .
How long would tumbling media last , I bought my tumbler second hand a few years ago and I am still using the same media , I just add some car polish each time and it seems to work OK so I have never changed it .

Dave
alan108

Re: Tumbling media

#2 Post by alan108 »

Dave, i've had my tumbler for three years,and am still using the same media (walnut shells),and it's still cleaning as good as the day I first used it.Like you,I add a small drop of dried salvo-autosol every now and again.I've thought about some new media,but,is it worth it at the moment?


Alan :)
1066
Full-Bore UK Supporter
Posts: 2252
Joined: Wed Aug 31, 2011 7:05 pm
Contact:

Re: Tumbling media

#3 Post by 1066 »

I've just received a supply of stainless steel tumbling media but not tried it yet - I have heard good reports of this so I'll let you know how it works.
TARGETMASTER
an altogether better trickler
www.targetmasteruk.com
User avatar
dromia
Site Admin
Posts: 20222
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Tumbling media

#4 Post by dromia »

I get my walnut media from shot blasting suppliers.

You can keep it fresh by adding white spirit to it.

Chopped up dryer sheets helps keep the dust down, nasty stuff.

I got some of those stainles steel pins for my wet tumblers for black powder cases and it is very good indeed but to be honest it was no better than the ceramic media I'm using.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
Dougan

Re: Tumbling media

#5 Post by Dougan »

I used rice for a few years (cheepest I could get) - which did the job on .357. But when I started on rifle calibers I got some proper corn cob media...works very well, especially with a tad of polish added now and again.
1066
Full-Bore UK Supporter
Posts: 2252
Joined: Wed Aug 31, 2011 7:05 pm
Contact:

Re: Tumbling media

#6 Post by 1066 »

dromia wrote:

I got some of those stainles steel pins for my wet tumblers for black powder cases and it is very good indeed but to be honest it was no better than the ceramic media I'm using.
Whats the ceramic media you are using Adam?
TARGETMASTER
an altogether better trickler
www.targetmasteruk.com
User avatar
dromia
Site Admin
Posts: 20222
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Tumbling media

#7 Post by dromia »

I got it from Buffalo Arms years ago and is angled cut cylinders, if that makes sense. :-P
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
1066
Full-Bore UK Supporter
Posts: 2252
Joined: Wed Aug 31, 2011 7:05 pm
Contact:

Re: Tumbling media

#8 Post by 1066 »

Well I never did - Thats a well kept secret.
http://www.jakescustomrods.co.uk/index. ... t&catId=59
TARGETMASTER
an altogether better trickler
www.targetmasteruk.com
User avatar
dromia
Site Admin
Posts: 20222
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Tumbling media

#9 Post by dromia »

A find indeed sir! :good: :D

I don't need any but I'm tempted to get a couple of bags just because of the price. :D

With the stuff at that price available here in the UK I wouldn't bother spending the £60 plus for bringing in the steel rods from the states. All the steel media they sell in the UK seems to be mixed shapes which are worse than useless as they get jammed on primer pockets and inside the cases.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Alpha1
Posts: 8625
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Tumbling media

#10 Post by Alpha1 »

Nice find think I will have a portion of that and I will have some of the once fired 7.62x54 nagant cases as well at £12 a hundred a bargain.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests