Page 1 of 1
Anybody here have a Tikka 595 in a GRS laminated stock ?
Posted: Tue Apr 02, 2019 11:50 am
by breacher
I need a measurement please.
The distance from front action bolt to front of stock.
I have a 595 with an over-barrel / reflex type suppressor and need to know if it will clear the GRS stock.
Re: Anybody here have a Tikka 595 in a GRS laminated stock ?
Posted: Tue Apr 02, 2019 9:03 pm
by Pete
325mm......(mine's in a GRS Hybrid stock). The other patterns may vary.
I know the adjustable Hunter is a bit shorter.
Pete
Re: Anybody here have a Tikka 595 in a GRS laminated stock ?
Posted: Tue Apr 02, 2019 10:35 pm
by breacher
Pete wrote:325mm......(mine's in a GRS Hybrid stock). The other patterns may vary.
I know the adjustable Hunter is a bit shorter.
Pete
Many thanks for taking the time to measure for me.
Re: Anybody here have a Tikka 595 in a GRS laminated stock ?
Posted: Wed Apr 03, 2019 7:54 am
by Pete
No problem.....the measurement is to the centre of the action screw hole.
And if it did turn out to be a bit too long, you could saw a bit off..................
Pete
Re: Anybody here have a Tikka 595 in a GRS laminated stock ?
Posted: Mon Apr 15, 2019 7:41 pm
by breacher
Pete wrote:No problem.....the measurement is to the centre of the action screw hole.
And if it did turn out to be a bit too long, you could saw a bit off..................
Pete
I have done worse !
Though never on laminate.
Now all I need to do is wait for a used one - I snoozed and loosed on the last one aaarggh