Page 1 of 3
What does this bit do????
Posted: Sun Jul 08, 2018 2:09 pm
by 38Super
TYpically having been singing it's praises recently the disconnector on my Bora has given up the ghost. First original part to break.
(picture is a genuine M16 disconnector which is a similar shape)
The 'tail' at the back has broken off.
Everything still functions as it should so I'm wondering what the tail actually does?
It's purpose appears to be to depress the rear of the disconnector when the safety is applied but I've no idea what that actually achieves,
Anyone know??
Re: What does this bit do????
Posted: Sun Jul 08, 2018 2:50 pm
by Jame5m
The tail on an m16 disconector is used only during fully automatic fire,
The safety pushes down the disconector and this lets the autosear control when the hammer falls
Re: What does this bit do????
Posted: Sun Jul 08, 2018 8:16 pm
by 38Super
So no use whatsoever on a UK spec shotgun
When the new one turns up could I trim the tail so that it doesn't break there again?
Re: What does this bit do????
Posted: Sun Jul 08, 2018 9:13 pm
by 1066
Why not dress the tail of the old one and continue using it?
Re: What does this bit do????
Posted: Sun Jul 08, 2018 10:17 pm
by 38Super
It's broken here so although it still works the spring is no longer secure potentially leading to something very embarrasing at least
Re: What does this bit do????
Posted: Mon Jul 09, 2018 6:56 am
by Blackstuff
Best to replace it and leave it original spec. You wouldn't want a burst fire 12b shotgun....and you definitely don't want one in the middle of a practical shotgun competition.... especially when there's 50 odd people watching you.....
Re: What does this bit do????
Posted: Mon Jul 09, 2018 2:51 pm
by 38Super
Replacement sear (as I've now found out it's called on the parts diagram) is on the way.
At least I now know why the majority of AR15 'sears' don't have the little tail.
If I hadn't happened to spot the tiny lump of metal on the floor I would never have known it was broken.
Is the sear on the F12 the same?
Re: What does this bit do????
Posted: Tue Jul 10, 2018 11:30 am
by Blackstuff
I've not had a good look at mine yet but i'd imagine its near identical to the BR99
Re: What does this bit do????
Posted: Tue Jul 10, 2018 11:05 pm
by 38Super
Blackstuff wrote:I've not had a good look at mine yet but i'd imagine its near identical to the BR99
I'm surprised you haven't stripped it down and started modifying it yet.
You were straight in there with your Bora.
Re: What does this bit do????
Posted: Wed Jul 11, 2018 6:53 am
by Blackstuff
I'm still testing it to make sure its a reliable enough gun to replace my BR99, THEN i'll start taking it to bits and breaking it