40lb Dipping Pot update.
Posted: Mon May 21, 2018 7:59 am
Here is my actual pot awaiting its proper Fahrenheit PID controller before being sent to me.
Phwoarrrrrrrrrrrrrrrrrrrrrrrrrrrr!
Phwoarrrrrrrrrrrrrrrrrrrrrrrrrrrr!
The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.
All people seeking membership must contact admin after registering to be validated.
https://www.full-bore.co.uk/
40lb Dipping Pot update.
Page 1 of 1
Re: 40lb Dipping Pot update.
Posted: Mon May 21, 2018 11:33 am
What is the wattage?
Re: 40lb Dipping Pot update.
Posted: Mon May 21, 2018 11:35 am
Feck knows.
Melts the 40lbs up to casting temp in about 1/2 an hour.
Melts the 40lbs up to casting temp in about 1/2 an hour.
Re: 40lb Dipping Pot update.
Posted: Mon May 21, 2018 12:50 pm
Where's the 100ft power cables to clip it onto the nearest pylon?
I bet half of Birtley goes dark when you plug that in
I bet half of Birtley goes dark when you plug that in
Re: 40lb Dipping Pot update.
Posted: Mon May 21, 2018 1:33 pm
You don't need a smart meter to tell when that is plugged in.
Re: 40lb Dipping Pot update.
Posted: Mon May 21, 2018 6:52 pm
Are you casting cannon balls?
Re: 40lb Dipping Pot update.
Posted: Tue May 22, 2018 8:38 pm
Well that's what we call pretend smelting.
This is what you use if you are serious
This is what you use if you are serious