Page 1 of 2
7.62x39 and me...
Posted: Wed Nov 16, 2016 8:38 pm
by polemass

Ok here we go-last weekend I did some testing.This was second time/batch.Various FMJ loads and finaly I was brave enough to shoot ONE pistol load...it is second from the right,165gr colour coated RNFPBB .311 bullet-I used 4.5gr Herco and CCI LR primer.I think next time it will be more powder,just.First from the left is 85gr Tokarev FMJ-but it is .308 and do not know what load to use.Second from the left is .310 Cadet in 125gr swaged.And here is the question?-will it fly from my AK?-knowing that collet in the middle is .320???First from the right is standard 123gr FMJ PPU-slightly longer seating in the case-57mm opposite to standard 55.5mm-also,will it fly better?I used 24.3 gr of AA1680/Lovex but all went low so next time load will be close to 25gr.All of them chambered ok.Also I made discovery about PPU ammo in 7.62x39-for some reason bullets are SEALED in case with black paint or something.I never liked them-always all over the place and min. 7" groups at 100m.So I pulled 10 of them from the case-cleaned sealant,checked/adjusted powder and bullet weight and hey presto!-dropped to 5" group...Remember folks...this is AK...only 12" long barrel...So for now I have more test to do and still on the top is factory Barnaul Hunting FMJ ammo...with occasional flyer...Any input welcome especially regarding pistol loads and lead bullets-for now as gallery rifle up to 50m but with heavy one I am planning to go up to 100m.

Re: 7.62x39 and me...
Posted: Wed Nov 16, 2016 9:05 pm
by saddler
Tried .32ACP pistol bullets & Bullseye?
Re: 7.62x39 and me...
Posted: Wed Nov 16, 2016 9:15 pm
by polemass
No,I am using now what is in the house but will make a note,thnx
Re: 7.62x39 and me...
Posted: Thu Nov 17, 2016 6:12 am
by dromia
Ed Harris has done a good bit of work on this calibre with cast bullets, well worth looking them up if you haven't already.
Re: 7.62x39 and me...
Posted: Thu Nov 17, 2016 7:06 am
by polemass
Thnx Dromia,this is very good info-just checked,loads of data

Re: 7.62x39 and me...
Posted: Thu Nov 17, 2016 10:38 pm
by meles meles
Ed Harris: who be he ?
Re: 7.62x39 and me...
Posted: Fri Nov 18, 2016 12:08 am
by saddler
meles meles wrote:Ed Harris: who be he ?
The bloke with that Orville puppet, innit!
Re: 7.62x39 and me...
Posted: Fri Nov 18, 2016 11:49 am
by TattooedGun
saddler wrote:meles meles wrote:Ed Harris: who be he ?
The bloke with that Orville puppet, innit!
I thought it was the main baddy out of The Rock
Re: 7.62x39 and me...
Posted: Fri Nov 18, 2016 1:45 pm
by snayperskaya
TattooedGun wrote:saddler wrote:meles meles wrote:Ed Harris: who be he ?
The bloke with that Orville puppet, innit!
I thought it was the main baddy out of The Rock
Or Erwin Konig in Enemy At The Gates.......
Re: 7.62x39 and me...
Posted: Fri Nov 18, 2016 4:07 pm
by lasbrisas
For what it's worth I shoot my AK indoors and I am using 6gr of N320, same powder I use in my .357 and M1 Carbine. I am lucky enough to be able to use the standard 123gr FMJ bullets as we have no club rules on jacketed bullets.