Page 1 of 2
6.5x55
Posted: Fri Jun 10, 2011 7:58 pm
by Alpha1
I have loaded 20 rounds for my Sweedish mauser. Gonna give it a try to morrow if all goes well.
140Grain jacketed bullit
43.4grains of N160
COL 3.091
Any body else load for this round I would be interested to here from any body with any loads that work in the swedish mauser.
Re: 6.5x55
Posted: Sat Jun 11, 2011 12:11 pm
by idge
that load should shoot very well , i use 139g privi bullets with 45grains of vvn160 and that shoots pretty dam good . great rifles .got any pics of it ?
Re: 6.5x55
Posted: Sat Jun 11, 2011 12:21 pm
by dodgyrog
I'm just loading some 100gr Soft Points for roe deer hunting.
40.7 gr Viht 140
Russian LRP
Lapua cases
Very accurate load
Re: 6.5x55
Posted: Sat Jun 11, 2011 10:57 pm
by Alpha1
It did not shoot very well at all I think this rifle is a dud I need to move it on.
Re: 6.5x55
Posted: Sun Jun 12, 2011 9:07 am
by ovenpaa
Have you tried N165 and 142 SMK's?
Re: 6.5x55
Posted: Sun Jun 12, 2011 9:11 am
by dodgyrog
Alpha1 wrote:It did not shoot very well at all I think this rifle is a dud I need to move it on.
It's probably got an oversize bore (most Military Swedes do) and needs a bullet that will fit the bore. Easy if you cast for it but not so easy if buying bullets off the shelf.
Re: 6.5x55
Posted: Sun Jun 12, 2011 9:37 am
by ovenpaa
The 142's seem to go well in Military Swedish Mausers, did I imagine it or did SMK have a 146 grain bullet in 6.5 once upon a time?
Re: 6.5x55
Posted: Sun Jun 12, 2011 9:53 am
by FilippoMo
ovenpaa wrote:The 142's seem to go well in Military Swedish Mausers, did I imagine it or did SMK have a 146 grain bullet in 6.5 once upon a time?
It was 156 grs but with a low ballistic coefficient the sierra to use for 6.5 is the 142.By the way my brother rifle does shoot
cast .268 diametre wery well so cast bullets could be tried with succes.
The other option is rebarreling Lothar Walter stocks barrels for the model 96,they do shoot well.
Sincerely
Filippo
Re: 6.5x55
Posted: Sun Jun 12, 2011 10:47 am
by Alpha1
It's probably got an oversize bore (most Military Swedes do) and needs a bullet that will fit the bore. Easy if you cast for it but not so easy if buying bullets off the shelf.
You could be right. I have a mould I will cast a few pills and see how it goes.
But its the sight thing again isnt it the mauser sight is calibrated for fmj not cast.
A whole load of work to work out the new settings.
I guess I better slug the bore.
Re: 6.5x55
Posted: Sun Jun 17, 2012 5:36 pm
by saddler
Alpha1 wrote:It's probably got an oversize bore (most Military Swedes do) and needs a bullet that will fit the bore. Easy if you cast for it but not so easy if buying bullets off the shelf.
You could be right. I have a mould I will cast a few pills and see how it goes.
But its the sight thing again isnt it the mauser sight is calibrated for fmj not cast.
A whole load of work to work out the new settings.
I guess I better slug the bore.
A new front sight blade solves a LOT of problems