The UK's Finest Independent Forum for Shooters and Gun Owners. Est 2010.

For sale or maybe a swap/deal on a muzzle brake of the same spec
A lightly used wildcat preditor 8 .30 cal 5/8" thread it's in fantastic condition probably 300 rds through it, I just don't get on with mods and prefer to be an unsociable b@$#@£d
£150 + any fees or a swap/deal

is this an american thread?

5/8 X 24?

It is 5/8 UNF

Which for the uninitiated is 18 tpi UNEF is 24

Bump and price drop £125 + any fees.
thread change bridges are available from UK custom shop for £60

Ok last price £100 + fees

I'm away on holiday at the moment, will take a look when home which will be another week. Talk to Simon, he knows what I'm looking for for my Handi rifle. I'd need to make sure I could get a thread adapter to make it fit a 18X1 .300 WSM but if all those bits work I'll have it.

Rob thread adaptors are available from UK custom shop at £60 each
http://www.wildcatrifles.co.uk/moderato ... idges.html

Handi Rifle is 5/8" UNEF but the standard Predator8 (200mm tube) is far too long to fit it.

I use a Predator8 on mine with the compact (112mm) tube set. Even then the standard forend is still about 4mm too long and hits the moderator rear bushing before the mod is fully tightened.

You could chop a bit off the forend or remove the mod's rear plastic bushing, on mine I use an ATI tacticool stock, the forend is about 35mm shorter and has more than enough room for the moderator to fit.

Maybe a swap for a scope of similar value to go on a .223