I did not know were else to post .
Question: Do neck bushings have a leading edge the one I made is just shaving brass off more like a neck turning tool.
Question for ovenpaa
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Question for ovenpaa
Yes, I machine bushes for myself with a chamfer on the inner leading edge to match or be slightly less than the shoulder angle, typically around 1,0mm in.
Re: Question for ovenpaa
I had a feeling that was what was wrong. I'll stick it back in the lathe and have another go. Thanks very much.
Re: Question for ovenpaa
Hmm still not working its just shaving brass off.
There is obviously more to this bushing lark than meets the eye.
I guess Ill just buy the bushing.
There is obviously more to this bushing lark than meets the eye.
I guess Ill just buy the bushing.
Who is online
Users browsing this forum: Google [Bot] and 2 guests