Interesting new Ammunition

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
25Pdr

Interesting new Ammunition

#1 Post by 25Pdr »

Interesting new Ammunition From Ruger

Clicky...

Image
Top
User avatar
Chuck
Posts: 23986
Joined: Tue Nov 23, 2010 11:23 am
Location: Planet Earth - Mainly
Contact:
Contact Chuck

Re: Interesting new Ammunition

#2 Post by Chuck »

Hmm very interesting - does it work???? Not in ballistic gel but against say denim, dense fibre material etc..?? What about overpenetration?? Any other articles available on this mate?
Chuck
Political Correctness is the language of lies, written by the corrupt , spoken by the inept!
Top
25Pdr

Re: Interesting new Ammunition

#3 Post by 25Pdr »

Chuck wrote:Hmm very interesting - does it work???? Not in ballistic gel but against say denim, dense fibre material etc..?? What about overpenetration?? Any other articles available on this mate?
Chuck
From
http://www.ammoland.com/2015/10/polycas ... z3ooawz5OY

"The ARX penetrates many barriers without deformation, and penetrates through clothing without clogging and degrading terminal performance."

Bullets made from Copper/Polymer, think it may be much cheaper to make than Copper/Lead which could lead to cheaper bullets for reloading.
Top
User avatar
Blackstuff
Full-Bore UK Supporter
Posts: 7845
Joined: Sun Nov 07, 2010 1:01 pm
Contact:
Contact Blackstuff

Re: Interesting new Ammunition

#4 Post by Blackstuff »

Looks like a copy off the Lehigh defense ammo. Looks like good stuff especially for the UK as its non-expanding but can you even get it here?

[youtube]http://youtu.be/-PDQcE-1T40[/youtube]
DVC
Top
User avatar
bradaz11
Full-Bore UK Supporter
Posts: 4788
Joined: Mon Jun 02, 2014 1:23 am
Home club or Range: The tunnel at Charmouth, BWSS
Location: Bristol
Contact:
Contact bradaz11

Re: Interesting new Ammunition

#5 Post by bradaz11 »

well a shop in malta stocks it, who's nearest ;)

and the lehigh looks like a solid version of someone else's dreamt up phillips screwdriver boolit when they were messing around with cnc cut moulds
When guns are outlawed, only Outlaws will have guns
Top
User avatar
Les
Posts: 4561
Joined: Mon Apr 28, 2014 12:19 pm
Home club or Range: WRPC
Location: Runcorn, via Africa and parts unknown.
Contact:
Contact Les

Re: Interesting new Ammunition

#6 Post by Les »

Blackstuff wrote:Looks like a copy off the Lehigh defense ammo. Looks like good stuff especially for the UK as its non-expanding but can you even get it here?
Fixed it for you.
https://www.youtube.com/watch?v=-PDQcE-1T40
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 4 guests