Would some kind soul with `Quick load` be kind enough to crunch the numbers for the following load I am working up for my M96 Carl Gustafs Mauser?
F/L sized PPU cases trimmed to 2.151
139gn PPU FMJ bullet seated to a C.O.A.L of 3.100 in un-crimped cases
CCI 200 L/R primers
40.0gn Ramshot Hunter powder.
I have chrono'd this load and got an average M/V of 2445 fps.
Many thanks in anticipation.
ukrifleman
6.5x55 Swiss Quick load data
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
ukrifleman
- Full-Bore UK Supporter
- Posts: 756
- Joined: Thu Jun 07, 2012 7:26 pm
- Contact:
Who is online
Users browsing this forum: No registered users and 9 guests