Long shot,but does anyone know where else i can get run of the mill 357 mag reload components from in either Bedfordshire,Northants or Cambs at reasonable prices? Im after 2000 lead bullets,2000 primers and a kilo of powder.I must add though that im not stocking up for an invasion! Half of it is for a friend who's retired and because im out working in many areas it makes sense for me to get it.
Peter Lawman is out of hard cast bullets for a few weeks and was wondering if theres anyone else about?
357mag
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: 357mag
have you tried Fenland Rural Sports? They will have the powder and possibly the bullets, also ping Dodgrog of this forum, he casts things and the ones I got off him were very nice.
Re: 357mag
Fenland havent got any lead bullets-only jacketed.
Do or not do-there is no try.
Master Yoda
Master Yoda
Re: 357mag
Try Dodgyrog, it may even be that someone is heading through and can transport them for you.
Do you get your 10% discount from FRS?
Do you get your 10% discount from FRS?
Re: 357mag
Steve,
How much are you paying for lead bullets?
I've bought from Shooting Supplies in the past and they've ECO-LUBE 38/357 Semi-wadcutter 158grs in stock at 26.41 Euro (per 300).
http://www.shooting-supplies.eu/main/EC ... .p423.html
How much are you paying for lead bullets?
I've bought from Shooting Supplies in the past and they've ECO-LUBE 38/357 Semi-wadcutter 158grs in stock at 26.41 Euro (per 300).
http://www.shooting-supplies.eu/main/EC ... .p423.html
Re: 357mag
I forgot to mention they also have Silver-Moly in packs of 2500 for 222.77 Euro.
http://www.shooting-supplies.eu/main/SI ... .p953.html
http://www.shooting-supplies.eu/main/SI ... .p953.html
Re: 357mag
Lead bullets are £49 per 1000 from Peter,but its the other things like 1000 primers at £30 and powder at £17 which also makes a difference!lapua338 wrote:Steve,
How much are you paying for lead bullets?
I've bought from Shooting Supplies in the past and they've ECO-LUBE 38/357 Semi-wadcutter 158grs in stock at 26.41 Euro (per 300).
http://www.shooting-supplies.eu/main/EC ... .p423.html
Do or not do-there is no try.
Master Yoda
Master Yoda
Re: 357mag
Peter used to sell Magtech LR primers at GBP22/1000 - I might even have a few left, they always worked well in .303
Re: 357mag
Yeah,i need to start reloading 303 because its getting an expensive round.ovenpaa wrote:Peter used to sell Magtech LR primers at GBP22/1000 - I might even have a few left, they always worked well in .303
Do or not do-there is no try.
Master Yoda
Master Yoda
Re: 357mag
At the risk of being flamed.......... 
I have never had much luck with .303 case life, but other than that it is a cheap and easy round to load.
I have never had much luck with .303 case life, but other than that it is a cheap and easy round to load.
Who is online
Users browsing this forum: No registered users and 2 guests